Assembly
INSTRUCTIONS FOR ASSEMBLY:
Unpack the box in a clear area. Check to make sure all components are present and in good condition. Do not dispose of the packing material until the assembly is completed. Tools have been provided for you to use when assembling the product. If you need assistance please go to our website at www.keysfitness.com or call 1
1. Attach the Front Stabilizer(2) onto the Main Frame(1) with the two Carriage Bolts(4), two Arc Washers(5) and two Cap Nuts(6).
Figure 1
2. First take off both Rollers(49) by removing Bolts(48) from the Main Frame(1). Install the Aluminum Rails(52&53) to the Main Frame(1). First slide on the four Washers(51) before installing the Aluminum Rails(52&53). After the rails are installed, reinstall the Rollers(49) with Hex Head Bolts(48).
Figure 2
7