Assembly

Figure 5

Figure 6

5.Connect the Upper Electronic Wire(70) and the two Pulse Cables(75) to the Console(76). Next, fasten the Console(76) to the top of the Console Tube(12) using four Screws(83).

Note: The four Screws(83) will already be installed into the back of the Console(76) when you remove it from the box.

6.First, install the Left Lower Handlebar(90) onto the Console Tube(72). Use Washer(21), Nylock Nut(22), and a Nut Cap(85).

Connect the Upper Left Handlebar(96) to the Lower Left Handlebar(90) with two Carriage Bolts(93), two Washers(94), and two Cap Nuts(95). Insert the Connecting Tube(84) into the bottom of the Lower Left Handlebar(90) using Screw(87), Washer(26), and a Nylock Nut(27). Last, repeat step 6 to assemble the right side.