Panasonic WZ-DM35NH dimensions G I TA L S I G N a L P R O C E S S O R S, Ramsa, Specifications

D I G I TA L S I G N A L P R O C E S S O R S

Digital Multi Processor

WZ-DM35NH

GEQ CH PEQ X-OVER LEVEL DELAY UTILITY

PUBLIC ADDRESS

RAMSA

•2 inputs and 4 outputs.

•6 functions: Graphic equalizer function, parametric equalizer function, delay function, crossover network

function, compressor/limiter function, and noise gate function.

•6 Basic Modes: Three delay modes for sense-of-direction control (DELAY1 to DELAY3) and three crossover

network modes (X-OVER1 to X-OVER3)

•Built-in digital audio interface and conforms to the AES/EBU format.

•24-bit A/D and D/A converters are employed for analog inputs and outputs to offer a dynamic range close to that

of an analog device.

•All settings can be saved in up to 16 patterns in the memory.

Dimensions
480	5	275
465
32	44
		Unit : mm

SPECIFICATIONS

	Model No.		WZ-DM35NH
	Input	No. of Channels	2 ch
		Analog
		Type	Electronic balance
		Rated Input	+4 dB
		Maximum Input	+24 dB or more
		Connector	XLR-3-31 or equivalent, 2 connectors
		Input Impedance	20 kΩ
		In-Phase Reject Ratio	40 dB or more
		A/D Converter	24-bit ∆-∑type
		Digital
		Type	AES/EBU format, for professional use
		Sampling Frequency	48 kHz±0.1%
		Connector	XLR-3-31 or equivalent, 1 connector
	Output	No. of Channels	4 ch
		Analog
		Type	Electronic balance
		Rated Output	+4 dB±1 dB
		Maximum Output	+24 dB or more (at 10 kΩ load)
		Output Impedance	150Ω
		Connector	XLR-type connector or equivalent, x4
		Applicable Load Impedance	600Ω or more
		D/A Converter	24-bit ∆-∑type
		Digital
		Type	AES/EBU format, for professional use
		Sampling Frequency	48 kHz
		Connector	XLR-3-31 or equivalent, 1 connector
			(Recommended cable: Canare Electric DA206 or equivalent)
	General	Frequency Response	20 to 20,000 Hz, +0.5, –1.0 dB
		Dynamic Range	Analog input/output (typ, IHF-A)
			115 dB (noise gate ON)
			109 dB (noise gate OFF)
		THD	0.015% at +4 dB, 20 to 20,000 Hz, 30 kHz LPF (at 600Ω load)
		Crosstalk	–70 dB or less (10 kHz)
	User Memory		No. of memories: 16
External		Type	RS-485 RAMSA-NET (See Note.)
Control		Connector	D-SUB 9-pin, IN/OUT 1 each, setscrew M2.6
			Recommended connectors
			Male: OMRON XM2A-0901 or equivalent
			Female: OMRON XM2D-0901 or equivalent
			Hood: OMRON XM2S-0911 or equivalent
	Pattern	Type	Make contact type, No. of control patterns: 12 + MUTE
	Control		Anti-reverse diode provided
		Connector	D-SUB 15-pin, setscrew M2.6
			Recommended connectors
			Male: OMRON XM2A-1509 or equivalent
			Hood: OMRON XM2S-1511 or equivalent
	Power Supply		AC220-240V 50/60Hz
	Power Consumption		19 W (as defined in the Electrical Appliances Control Act)
	Heat Flow		19 W (15 kcal)* The figure in parentheses is calorific value per hour.
	Stacking Conditions		2 units high maximum
			* If you are using 3 units or more, leave a space for a unit or more every 2 units.
	Dimensions		480 (W) x 44 (H) x 280 (D) mm (without rubber feet)
	Weight (approx.)		4.5 kg

Note: "RAMSA-NET" is a protocol exclusive to Matsushita Communication Industrial Co., Ltd., used to send and receive data between the host computer and two or more audio control units connected to it with communication lines.

Rear Panel