JVC UX-P6R, CA-UXP6R, CA-UXP4R, SP-UXP6 Using the Timers, Using Daily Timer and Recording Timer

Page 23

Using the Timers

Continued

 

There are three timers available — Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit (see page 9). When you press TIMER on the unit for more than 3 seconds, the display alternates between “ADJUST” and “CLOCK” for about 5 seconds.

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

2 Set the on-time you want the unit to turn on at.

1)Press ¢ or 4to set the hour, then press TIMER.

2)Press ¢ or 4to set the minute, then

press TIMER.

TIMER

 

The unit enters off-time setting mode.

[DAILY

]

When the on-time comes, the unit automatically turns on (the

indicator flashes just before the on-time, and continues flashing while the timer is operating). Then, when the off- time comes, the unit automatically turns off (on standby).

The timer setting remains in memory until you change it.

• When the DAILY indicator is lit on the display, the timer

acts as the Daily Timer. Once the Daily Timer has been set,

it will be activated at the same time everyday until the timer

3 Set the off-time you want the unit to turn off (on standby) at.

1) Press ¢ or 4to set the hour, then press

TIMER.

2) Press ¢ or 4to set the minute, then press TIMER.

The unit enters source selecting mode.

TIMER

is turned off.

• When the REC indicator is lit on the display, the timer acts

as the Recording Timer. After the Recording Timer has

been performed, the details of the setting remain stored but

the timer is turned off.

Before you start...

When using “ TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

 

1 Press and hold TIMER for more

TIMER

than 3 seconds.

 

The timer ( ) indicator lights up, and the timer mode indicator (DAILY or REC) and the current on-time flash on the display.

The unit enters on-time setting mode.

[DAILY]

4 Press ¢or 4to select

 

 

 

 

 

 

 

 

the timer mode (Daily Timer

 

 

 

 

 

 

 

 

or Recording Timer) and the

 

 

source to play, then press TIMER.

 

 

• Each time you press ¢ or 4, the timer

TIMER

 

 

mode and the source change as follows:

 

 

DAILY TUNER REC TUNER

DAILY TAPE DAILY CD

DAILY TUNER: tunes into the last station you were listening to. (Daily Timer)

REC TUNER: records the last station you were listening to. (Recording Timer)

•Put a recordable cassette into the deck.

DAILY CD: plays a CD. (Daily Timer)

DAILY TAPE: plays a tape. (Daily Timer)

•Make sure that the tape direction is correct.

5 Press ¢or 4to set the volume level.

• You can select the volume level

(“VOLUME 0” to “VOLUME40” and “VOLUME –”).

If you select “ VOLUME –,” the volume is set to the last level when the unit has been turned off.

To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level

“VOLUME 0.”

– 20 –

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Micro Component System Class Laser Product Above ALL About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Pressing this button also turns on the unit Display WindowUX-P4R and UX-P3R Remote ControlUX-P6R and UX-P5R FM antenna Supplied AccessoriesConnecting Antennas Getting StartedAM MW/LW antenna Connecting SpeakersTurn the AM loop antenna until you have the best reception Release the finger from the clampFor playing the other equipment through this unit Connecting Other EquipmentBy using audio cords not supplied, connect To connect audio equipmentSelecting the Sources and Starting Play Turning On the PowerSetting the Clock Common OperationsSelecting the Display Brightness only for UX-P6R and UX-P5R Adjusting the VolumeReinforcing the Bass Sound Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts Tuning in a StationPresetting Stations Tuning in a Preset StationSearching for Programs by PTY Codes PTY Search Receiving FM Stations with RDSChanging the RDS Information To activate the EON function Switching to a Program Type of Your Choice TemporarilyOn the remote control only Press PTY/EON until EON Select alternately appear on the displayPress CD 3/8 Playing Back CDs CD/CD-R/CD-RWPlaying Back the Entire CD Normal Play Basic CD OperationsRepeat to program other tracks you On the remote control only Load a CDProgram Play Press Prog programOn the unit only Playing at Random Random PlayProhibiting Disc Ejection Tray Lock Repeating Tracks Repeat PlayPress 0for cassette deck To play both sides Reverse ModePlaying Back Tapes Playing Back a TapePress REC RecordingRecording on a Tape Check the recording direction for the tapeRepeat steps 2 and 3 to record other tracks you want To record on both sides Reverse ModeCD Direct Recording One Track RecordingUsing Daily Timer and Recording Timer Using the TimersWait for about 5 seconds after specifying the time length Using Sleep TimerOn the remote control only Press Sleep How Sleep Timer actually worksDescription of the PTY codes TroubleshootingAdditional Information Handling cassette tapes MaintenanceCleaning the unit Handling discsSpecifications 0101MWMMDWJEM

UX-P6R, UX-P4R, SP-UXP4, SP-UXP6, CA-UXP4R specifications

The JVC CA-UXP6R, SP-UXP6, SP-UXP4, UX-P6R, and UX-P4R are compact yet powerful audio systems designed for music enthusiasts seeking high-quality sound from a small footprint. These systems exemplify JVC's commitment to delivering advanced audio performance and innovative technology in home entertainment.

One of the standout features of the JVC CA-UXP6R is its impressive power output. With an output of 45 watts per channel, users can experience dynamic sound with clarity and depth. This makes it suitable for various listening environments, from cozy living spaces to larger rooms. The system's dual speaker configuration contributes to a balanced soundstage, enhancing the overall listening experience.

The SP-UXP6 and SP-UXP4 speaker systems are designed to complement the CA-UXP6R, featuring high-quality drivers that deliver rich bass response and crystal-clear highs. The wooden cabinet construction of the speakers minimizes resonance, ensuring that the audio remains uncolored and true to the source. This attention to detail in design and materials is a hallmark of JVC's audio engineering.

These systems also incorporate advanced connectivity options, including Bluetooth technology, allowing users to stream music from their smartphones, tablets, or laptops wirelessly. This feature is particularly convenient for those who enjoy a seamless audio experience without the hassle of tangled wires. Additionally, the systems support USB playback, making it easy to connect and play audio files directly from USB devices.

Another notable characteristic of the JVC UX-P6R and UX-P4R models is their user-friendly interface. They are equipped with an intuitive remote control that gives users easy access to various functions, including adjusting volume, changing tracks, and switching sources. The large LCD display provides clear visual feedback, making it easy to navigate through playlists and settings.

Moreover, these audio systems include a built-in FM tuner, enabling users to enjoy their favorite radio stations without the need for additional equipment. This is a valuable feature for those who appreciate live broadcasts and music from local FM channels.

In summary, the JVC CA-UXP6R, SP-UXP6, SP-UXP4, UX-P6R, and UX-P4R combine compact design with powerful audio performance. With advanced connectivity, high-quality speakers, and user-friendly features, they represent an ideal choice for anyone seeking a versatile audio solution that doesn’t compromise on sound quality. Whether for casual listening, parties, or home theater setups, these systems deliver an impressive and enriching auditory experience.
Top Page Image Contents