OWNER'S MANUAL
MACHINE ADJUSTMENT
NOTE:
- SOME PARTS MAY HAVE BEEN REMOVED FOR CLARITY.
STEP 1:
- LOOSEN NUTS (77 & 78).
STEP 2:
- BE SURE BUMPER (43) STAYS IN CONTACT WITH FRAME (11),
THEN ADJUST POSITION OF PULLEY (4) TO ADJUST TENSION OF CABLE (20).
- ONCE DESIRED TENSION IS REACHED, WRENCH TIGHTEN NUTS (77 & 78).
- WRENCH TIGHTEN ALL PREVIOUSLY HAND TIGHTENED HARDWARE.
77
4
4
78
20
20
43
11
BE SURE BUMPER (43) STAYS IN CONTACT WITH FRAME (11).
PAGE 31 |