To clear the programming and resume normal playback

OPERATIONAL INSTRUCTIONS

CD and MP3 CD Operation - continued

3.Press or to select the track to be programmed.

4.Press TIMER/MEMORY to save the track in the first program location. For example, if you selected track number 14, it will appear in Program position 1 as shown below.

5.For the next program position, select another desired track (It is not necessary to select CD if the track is in the same CD).

6.Confirm the selection using theTIMER/MEMORY.

7.To program other tracks in the memory, repeat steps 3 - 6.

To play the program, press . The program can be played back again as long as “MEMORY” appears on the display.

To clear the programming and resume normal playback

The programming is erased by pressing FM MODE/ until the “MEMORY” display disappears, or by opening the CD changer door. If the unit is switched off, the program is erased.

Notes

1.RANDOM will not function in programmed play.

2.This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 file(s).

If you select a folder which doesn’t contain any MP3 file(s), the unit will automatically skip to the next folder until it finds one containing an MP3 file(s).

OPERATIONAL INSTRUCTIONS

CD and MP3 CD Operation - continued

Program memory for MP3 CDs

The built-in program memory enables up to 40 titles to be played from one disc in the order of your choice. Any title can be stored more than once within one program.

1.Load the CDs.

2.Press TIMER/MEMORY in the stop mode to switch to programming mode.

3.Select the desired folder (album) by repeatedly pressing or .

4.Select the desired track by pressing or to select:

5.Confirm selection usingTIMER/MEMORY to save the track in the first location.

6.To store the remaining titles in the memory, repeat Steps 3-5.

To play back the program, press . When is pressed, the program can be played back again as long as “MEMORY” appears on the display.

To clear the programming and resume normal playback

The programming is erased by pressing FM MODE/ in the programming mode (until “MEMORY” display disappears), or by opening the disc compartment.

Note: is not used for programming.

ID3 TAG (Artist/Title)

1.When an MP3 disc is playing, MP3 INFO repeatedly. The track no., title and artist information will be shown in the display if disc information is available.

2.To resume normal play display, press MP3 INFO repeatedly until playing time reappears.

21 iLuv

iMM9400/9500 V10M10_IM_EN_060509

iLuv 22