JVC RX-D205S, RX-D206B Basic settings, Press SET, 0ch, Press Setting, Before you start, remember

Page 17

Basic settings

3Turn MULTI JOG to select the appropriate number of connected speakers (speaker channel number).

As you turn the jog, the speaker channel number changes as follows.

•For the details of speaker channel number, see “ Speakers (channels) number and the size” on page 16.

ANALOG

LR

S.WFR

To obtain the best possible sound effect from Surround/DSP modes (see pages 27 to 31), you need to set up the speaker and subwoofer information after all the connections are completed. From pages 15 to 20, how to set speakers and other basic items of the receiver are explained.

Setting the speaker information easily—Quick Speaker Setup

Quick Speaker Setup helps you to easily and quickly register the speaker size, speaker distance, and output level of each speaker according to your listening room to create the best possible surround effect.

•You can also register each speaker’s information manually. For details, see page 18.

 

1,7

2,4,6

1,3,5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1Press SETTING and turn MULTI JOG until

“QUICK SPK SET” appears on the display.

ANALOG

LR

S.WFR

2Press SET.

ANALOG

LR

S.WFR

2.0ch

 

2.1ch

 

 

3.0ch

 

3.1ch

 

 

 

4.0ch

 

4.1ch

 

 

5.0ch

 

5.1ch

 

 

 

 

6.0ch

 

 

6.1ch

 

 

 

7.0ch*

 

 

7.1ch

 

 

 

 

 

 

(Back to the beginning)

* “7.0ch” is the initial setting.

4Press SET.

ANALOG

LR

S.WFR

5Turn MULTI JOG to select the appropriate room size to match to your listening room.

As you turn the jog, the room size changes as follows.

•To select your appropriate room size, see “Room size and the speaker distance/output level” on page 16.

ANALOG

LR

S.WFR

S M L*(Back to the beginning)

* “L” is the initial setting.

6Press SET.

QUICK SPEAKER SETUP is now completed, then the display goes back to SETTING menu.

7Press SETTING.

NOTES

•This procedure will not be completed if you stop in the middle of the setting process.

•Once Quick Speaker Setup is performed, the speaker output levels are also set to appropriate values automatically (common to all sources). If you want to set the speaker output levels separately for each source, see “Adjusting the speaker output levels” on page 22.

CONTINUED ON THE NEXT PAGE

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents For Customer Use RX-D205S / RX-D206BDeclaration of Conformity For Canada/pour Le CanadaFor U.S.A Table of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector 1 to DVD Front panel Display windowRear panel Putting batteries in the remote control Before InstallationChecking the supplied accessories Getting startedWire not supplied Connecting the FM and AM antennasAM antenna connection FM antenna connectionSpeaker Layout Diagram Connecting the speakersConnecting the speakers Connecting the powered subwooferConnecting a DVD recorder or DVD player Connecting video componentsTurn off all components before making connections RedComponent video cable not supplied BlueRed Connecting a TV Connecting a DBS tunerGreen Blue Red Video cableConnect the unit to the PC using a USB cable not supplied How to install the USB driversUSB connection Digital connectionUSB drivers are installed automatically Connecting the power cordCheck if the drivers are correctly installed Now the PC is ready for playback through the USB connectionSelecting the analog or digital input mode Turn on the powerTo turn off the power into standby Basic operationsListening with headphones Adjust the volumeInitial setting Digital Auto Ex. When Dolby Digital is selectedBasic adjustment of auto memory Turning off the power with the Sleep TimerSignal and speaker indicators on the display Turning off the sounds temporarilyPress Setting Basic settingsPress SET 0chRoom size and the speaker distance/output level Basic setting itemsSpeakers channels number and the size Setting subwoofer information-SUBWOOFER Setting the speakersSetting the surround back speakers-S Back OUT Turn Multi JOG to select the appropriate SettingSetting the speaker distance Activating the EX/ES/PLIIx setting- EX/ES/PLIIxFrom the remote control AutoSetting subwoofer output-SUBWOOFER OUT Setting bass soundSetting the crossover frequency-CROSSOVER Setting the low frequency effect attenuator-LFEVCR S/C Using the Midnight modeDVD S/C Basic adjustment items Sound adjustmentsOperating procedure Press AdjustPress Test again to stop the test tone Press SoundAttenuating the input signal-INPUT ATT Adjusting the bass soundsAdjusting the virtual room size for DSP modes Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone Using preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modeReproducing theater ambience Creating realistic sound fieldsIntroducing the Surround modes Dolby DigitalDTS 3D Headphone modeAbout other digital signals Digital Acoustic Processor DAP modes All Channel Stereo mode ALL CH StereoIntroducing the DSP modes DTSDolby Digital Incoming Signal Type Using the Surround/DSP modesAbout the DSP modes Virtual Surround BackSelecting the Surround/DSP modes When you select Auto SurroundConnections 1 AV Compu Link connection AV Compu Link remote control systemConnections 2 Video cable connection Not suppliedAutomatic selection of TV’s input mode Connecting procedureAutomatic power on/off One-touch video playOperating other JVC products Release STANDBY/ON DVR/DVD Changing the remote control code for DVD recorderDVD recorder or DVD player Operating other manufacturers’ products Changing the transmittable signals for operating a TVRelease STANDBY/ON TV/DBS/CATV Manufacturers’ codes for TVRelease STANDBY/ON VCR Changing the transmittable signals for operating a VCRTry to operate your VCR by pressing Manufacturers’ codes for VCRManufacturers’ codes for DVD player Manufacturers’ codes for Catv converter/ DBS tunerTry to operate your DVD player by pressing Power TroubleshootingProblem Possible Cause Solution Remote control TunerAmplifier SpecificationsFM tuner IHF AM tunerPage Page Audio Video Control Receiver
Related manuals
Manual 88 pages 24.22 Kb

RX-D205S, RX-D206B specifications

The JVC RX-D205S and RX-D206B are two versatile and feature-rich audio receivers designed to deliver high-quality sound experiences for home entertainment enthusiasts. Both models are part of JVC's commitment to providing advanced audio technologies while ensuring user-friendly functionality and connectivity options.

One of the standout features of the RX-D205S and RX-D206B is their multi-channel surround sound capability. Each receiver supports a range of audio formats, including Dolby Digital and DTS, allowing users to enjoy immersive audio experiences whether they're watching movies, playing video games, or listening to music. With built-in amplification, these models deliver powerful audio performance, making them ideal for both small and large rooms.

Connectivity is a significant highlight for both models. They come equipped with a variety of input options, including multiple HDMI ports, optical and coaxial inputs, and analog inputs. This extensive connectivity ensures compatibility with a wide range of devices such as Blu-ray players, gaming consoles, streaming devices, and more. Additionally, the receivers support 4K Ultra HD passthrough, ensuring that users can enjoy high-resolution video content without compromising on audio quality.

Another key feature is their user-friendly interface and remote control, allowing users to navigate settings, adjust volume levels, and switch between input sources effortlessly. Both models also incorporate Bluetooth technology, enabling wireless streaming from smartphones and tablets. This feature enhances convenience, allowing users to easily enjoy their favorite playlists or podcasts directly from their mobile devices.

In terms of design, the RX-D205S and RX-D206B boast a sleek and modern aesthetic, making them fitting additions to any home entertainment setup. They are designed for durability and longevity, with high-quality components that contribute to their excellent sound performance.

In summary, the JVC RX-D205S and RX-D206B are impressive audio receivers that combine innovative technologies with practical features. Their multi-channel support, versatile connectivity options, Bluetooth capability, and robust design make them excellent choices for anyone seeking to upgrade their home audio system and enjoy an elevated entertainment experience. Whether for casual listening or cinematic immersion, these receivers deliver powerful performance and ease of use, establishing them as noteworthy contenders in the world of home audio.
Top Page Image Contents