ProForm DTL32941 user manual

Page 9

8.Attach a Wheel (66) to the inner side of each Extension Leg (63) with a Wheel Bolt (64) and a Wheel Nut (32) as shown. Do not overtighten the Wheel Bolt. The Wheel should be able to spin freely.

Lift the treadmill frame (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 11), but do not latch it. Make sure that the frame is centered between the Handrails (not shown). Firmly tighten the 3/4” Bolts (not shown) used in assembly step 4. Then, lower the frame to the floor.

8
32 66	63
32 66	64

9.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

9

Image 9

Contents Model No. DTL32941 Serial No QUESTIONS?Table of Contents Important Precautions Never insert any object into any opening Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedPage Page Page Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram STEP-BY-STEP Console OperationInsert the key fully into the console Change the incline of the treadmill as desired Follow your progress with the three displays. Time/DistanceMeasure your heart rate if desired HOW to USE the Upper Body Arms HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Key and Unplug the Power CORD. Using Problem The walking belt slows when walked onProblem ONE of the Upper Body Arms Squeaks During USE Walking belt has shifted to the right, turnExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty. Description Key Qty DescriptionRemove this Exploded Drawing and Part List from the Manual Exploded DRAWING-Model No. DTL32941 HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT