JVC RX-7032VSL manual Activating the DSP Modes, To cancel the DSP modes, ALL Channel Stereo mode

Page 40

ALL Channel Stereo mode

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. This mode cannot be used

without activating the surround speakers.

•If the front speakers are deactivated, “All Channel Stereo” cannot be selected.

Activating the DSP Modes

Activating one of the DSP modes for a source automatically recalls the memorized settings and adjustments (see pages 24 to 31.)

You can also use the buttons on the remote control for the same functions.

RX-7032V AUDIO/VIDEO CONTROL RECEIVER

Sound reproduced from normal stereo

Sound reproduced from All Channel Stereo mode

1.Select and play any sound source.

2.Press DSP repeatedly until the DSP mode you want appears on the display.

•Each time you press the button, the DSP modes change as follows:

 

DIGITAL AUTO

 

 

L C

R

LINEAR PCM

 

 

SUBWFR

LFE

DIGITAL

DSP

SPEAKERS 1

LS

RS

 

 

 

 

 

 

 

VOLUME

= HALL 1

= HALL 2

= LIVE CLUB

= DANCE CLUB = PAVILION

= ALL STEREO*

= THEATER 1

= THEATER 2

= MONO FILM**

=(Back to the beginning)

*When surround speakers are set to “NONE,” you cannot select “ALL STEREO.”

**When multi-channel signals come in, you cannot select “MONO FILM.”

Note:

When the surround speakers are deactivated, the 3D-PHONIC processing is applied to the DSP modes (the 3D-PHONIC indicator also lights up).

Monaural Film

In order to reproduce a more acoustic sound field in your listening room while viewing monaural sound video software (analog and 2- channel digital signals), you can use this mode.

The surround effect will be added, and the sound localization of actor’s words will be improved. This mode cannot be used for

multi-channel digital signals.

When “MONO FILM” is used, sounds come out of all the connected (and activated) speakers.

•If incoming signals change from 2-channel digital signal to another digital signal type, “MONO FILM” is canceled and an appropriate Surround mode is activated.

To cancel the DSP modes

Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote control). “SURR OFF” appears on the display.

•When the front speakers are deactivated, “HEADPHONE” will appear.

37

Page 39 Page 41
Image 40
Page 39 Page 41
Contents RX-7032VSL If in Doubt Consult a Competent Electrician RX-7032VSL Precautions FeaturesIntroduction Table of Contents Parts Identification Remote ControlButtons 14, 42 Display Window Front PanelInside the front door How to open the front door Press down on PUSH-OPENRear Panel Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW Antennas Putting Batteries in the Remote ControlInsert the speaker signal cable Connecting the SpeakersBasic connecting procedure Close the speaker terminalConnecting the subwoofer speaker Placing speakersFront speakers and center speaker Surround and surround back speakersConnecting Audio/Video Components Analog ConnectionsCD player Cassette deckVideo component connections TV and/or DBS tunerTo listen to the sound after connection, press VCR To audio output ı To S-video input To composite video inputTo listen to the sound after connection, press DVD Multi DVD playerDVD player Connecting the Power Cord Plug the power cord into an AC outletDigital Connections Digital output terminalTurning On the Power Daily Operational Procedure Selecting the Source to PlayBasic Operations Adjusting the Volume Speaker and signal indicators on the displayWhen analog input is selected Always lights up Selecting different sources for picture and soundSelecting the Analog or Digital Input Mode Listening with headphones onlyTo use the speakers connected to the Front Speakers On the unitSetting the Dynamic Range To select the analog input mode againTurning Analog Direct On and Off Press Analog Direct so that a Direct appears on the displayPress TV SOUND/DBS Press TAPE/CDRUsing the Sleep Timer Reinforcing the BassMuting the Sound Changing the Display BrightnessTuning in to Stations Manually Using Preset TuningReceiving Radio Broadcasts Press FM or AM to select the bandPress the 10 keys to select a preset channel number Selecting the FM Reception ModeWhile listening to an FM station, press FM Mode Press FM/AM to select the bandTo search for a program using the PTY codes Searching for a Program by PTY CodesPress PTY Search while listening to an FM station To show the RDS informationSwitching to a Program of Your Choice Automatically Basic Settings Setting the Speakers Configuration RemotePress Quick Speaker Setup Press in Multi JOG Push SETBasic Setting Items Speakers channels number and sizeRoom size and speaker distance Items To doBasic Procedure Press SettingSetting the Speakers Push in Multi JOG Push SETSetting the Bass Sounds Setting the Speaker DistanceSelect one of the following Memorizing the Volume Level for Each Source Setting the Digital Input TerminalsSelecting main or sub channel-DUAL Mono Adjusting Sound Basic Setting Items Basic ProcedurePress Adjust Ex. When adjusting the subwoofer level toAdjusting the Equalization Patterns Adjusting the Speaker Output LevelsEqualization adjustment-DIGITAL EQ Repeat steps 2 and 3 to adjust the other center frequencySelect a speaker you want to adjust Adjustable parametersFor DAP modes For Pro Logic II Music onlyUsing the Surround Modes Reproducing Theater Ambience Introducing the Surround ModesWhat is Dual Mono? DTS Digital SurroundDTS Extended Surround DTS-ES DTS 96/24Incoming Signal Type EX/ES Setting Available Surround ModeSurround Modes Applicable to the Various Software 3D Headphone Mode-3D H PhoneActivating the Surround Modes Press Surround to activate the Surround modeSelect and play any source other than DVD Multi Using the DSP Modes 3D Headphone ModeReproducing the Sound Field Introducing the DSP ModesTo cancel the DSP modes ALL Channel Stereo modeMulti-channel digital signals Activating the DSP ModesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModeMulti indicator also lights up Press DVD Multi so that DVD Multi appears on the displayCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverPress the play 3 button on the CD player Automatic Source SelectionOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player CD changerCD recorder Cassette deckDVD player Operating Video ComponentsCH + If there are more than one code listed for your brand of TV Release TVTry to operate your TV by pressing TV For TV Manufacturer CodesRelease CATV/DBS For DBS tunerManufacturer Codes For Catv converterIf there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR For VCRRelease Audio For DVD playerDenon Panasonic Philips Pioneer 04, 05 Samsung Sony Toshiba YamahaTroubleshooting Problem Possible Cause SolutionSpecifications Description of the PTY codesAudio VideoRX-7032VSL AUDIO/VIDEO Control Receiver

RX-7032VSL specifications

The JVC RX-7032VSL is a versatile and powerful audio receiver that caters to both audiophiles and casual listeners alike. Renowned for its robust build quality and exceptional sound performance, this model blends advanced audio technologies with user-friendly features, making it a solid choice for home audio setups.

At the heart of the RX-7032VSL is its impressive amplifier section, delivering a substantial output power of up to 100 watts per channel. This ensures that even the most demanding speakers can be driven effortlessly, producing rich audio clarity and dynamic soundscapes that elevate your listening experience. The receiver supports various speaker configurations, enabling optimal flexibility in setup.

One of the standout features of the JVC RX-7032VSL is its incorporation of Dolby Pro Logic II technology, which enhances stereo sound and creates a more immersive surround experience. This technology allows users to enjoy stereo sources in a multi-channel format, enriching movie and music playback with enhanced spatial audio depth. Additionally, the unit includes built-in DSP modes that offer preset sound profiles tailored for different genres and media types, allowing users to easily switch modes depending on their listening preferences.

Connectivity is another forte of the RX-7032VSL. The receiver boasts multiple audio inputs, including standard RCA and digital optical and coaxial options. This broad range of inputs allows users to connect various devices, from CD players and turntables to gaming consoles and media streaming devices. Moreover, the unit is equipped with dual-zone capabilities, enabling audio playback in separate areas of your home, expanding its functionality for entertainment purposes.

The design of the RX-7032VSL emphasizes both aesthetics and practicality. Its sleek, modern appearance features an intuitive front panel with easy-to-read displays and controls for effortless operation. Users can navigate settings and inputs quickly, enhancing the overall usability of the product.

In summary, the JVC RX-7032VSL is a feature-rich audio receiver that combines powerful amplification, advanced surround sound processing, and extensive connectivity options. Whether you're watching movies, listening to music, or gaming, it’s designed to provide an extraordinary audio experience that meets a variety of needs. With its blend of performance, flexibility, and ease of use, the RX-7032VSL certainly stands out in the competitive landscape of home audio receivers.
Top Page Image Contents