7Low frequency effect attenuator—LFE ATTENUATE
If the bass sound is distorted while playing back software encoded with Dolby Digital or DTS, set the LFE level to eliminate distortion.
Select one of the following:
0dB: Normally select this.
−10dB: Select when the bass sound is distorted.
Selecting main or sub channel—DUAL MONO
When the playback source is Dual Mono, you can select which, or both channels to listen to.
Select the playback sounds (channel).
MAIN: Select to play back the main channel (Ch1).*1 Signal indicator “L” lights up while playing back this channel.
SUB: Select to play back the
ALL: Select to play back both the main and
Signal indicators “L” and “R” light up while playing back these channels.
Notes:
•The Dual Mono format is not identical with bilingual broadcasting for TV programs. So this setting does not take
effect while watching such bilingual programs.
*1 Dual Mono signals can be heard from the following speakers— L (left front speaker), R (right front speaker), and C (center
|
|
|
|
|
|
|
|
| With Surround Activated |
|
|
|
|
|
|
| |||||||||||||||||||
Dual Mono | Without Surround |
|
|
|
|
|
|
| Center speaker setting |
|
|
|
|
|
|
| |||||||||||||||||||
Setting |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SMALL/LARGE |
|
|
|
|
|
|
|
|
|
| NONE | |||||||||||||||||||
| L | R | L |
|
|
|
| C |
| R |
|
|
|
|
| L |
|
| R | ||||||||||||||||
MAIN | Ch 1 | Ch 1 | — |
|
|
| Ch 1 |
| — |
|
|
|
| Ch 1 |
|
| Ch1 | ||||||||||||||||||
SUB | Ch 2 | Ch 2 | — |
|
|
| Ch 2 |
| — |
|
|
|
| Ch 2 |
| Ch 2 | |||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
ALL | Ch 1 | Ch 2 | — |
| Ch 1+Ch 2 |
| — |
|
| Ch 1+Ch 2 | Ch 1+Ch 2 | ||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setting the Digital Input Terminals
When you use the digital input terminals, register which components you have connected to the digital input terminals.
7Digital coaxial
Set the component connected to the digital coaxial terminal (DIGITAL IN 1).
DVD (initial setting), CD, TV (or DBS*) or CDR.
*If you have changed the source name from “TV” to “DBS,” “DBS” appears (see page 18).
7Digital optical terminals—DGTL IN OPTICAL
As you set the components connected to the digital coaxial terminal (DIGITAL IN 1), the optical terminals (DIGITAL IN 2
– 4) will be automatically fixed to connect the components listed below.
When “DIGITAL IN 1 (DGTL IN COAX)” is set to “DVD”
2: CD 3: TV (or DBS*) 4: CDR
When “DIGITAL IN 1 (DGTL IN COAX)” is set to “CD”
2: DVD | 3: TV (or DBS*) | 4: CDR | |
|
| ||
When “DIGITAL IN 1 | (DGTL IN COAX)” is set to “TV” or | ||
“DBS”* |
|
|
|
|
|
|
|
2: DVD | 3: CD |
| 4: CDR |
|
| ||
When “DIGITAL IN 1 | (DGTL IN COAX)” is set to “CDR” | ||
|
|
|
|
2: DVD | 3: CD |
| 4: TV (or DBS*) |
|
|
|
|
*If you have changed the source name from “TV” to “DBS,” “DBS” appears (see page 18).
Memorizing the Volume Level for Each Source
This unit memorizes some settings separately for each source.
In addition, you can store the volume level for each source with the other memorized
7One Touch
Select one of the following:
ON: Select to store the volume level separately for each source. (The ONE TOUCH OPERATION indicator lights up on the display.)
This receiver memorizes the volume level—
•when you change the source, or
•when you change the source name.
OFF: Select this not to store the volume level.
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume level for the currently selected source is recalled when the source is selected.
To cancel the One Touch Operation
Set One Touch Operation to “OFF” so that the ONE TOUCH OPERATION indicator goes off.
28