2. Identify the Left Upright (73) and the Right | 2 |
|
Upright (74). Hold the Right Upright near the |
| |
|
| |
Right Base Cover (77) as shown. Insert the | 97 |
|
Upright Wire Harness (75) up through the rec- |
| |
49 |
| |
tangular hole in the bottom of the Right Upright |
| |
and out of the top of the Right Upright. |
|
|
Gently pull up on the Upright Wire Harness (75) |
|
|
as you set the Right Upright (74) on the Base | 75 |
|
(83) inside the Right Base Cover (77). Be care- |
| |
ful not to pinch the Upright Wire Harness. | 73 |
|
Attach the Right Upright (74) to the Base (83) |
|
|
with two Upright Bolts (72) and two Star |
| 74 |
Washers (90). Note: It may be necessary to tip | 76 |
|
the tops of the Uprights forward slightly as you |
| |
|
| |
thread the Upright Bolts (72) into the Uprights. |
| 77 |
Do not tighten the Bolts yet. |
| |
Hold the Left Upright (73) near the Left Base |
| 83 |
Cover (76), and insert the TV Cable (49) and the |
|
|
AV Cable (97) up through the rectangular hole in |
|
|
the bottom of the Left Upright and out of the top |
|
|
of the Left Upright. Attach the Left Upright to the |
| 90 |
Base (83) with two Upright Bolts and two Star |
| 72 |
Washers (not shown). Do not tighten the Bolts |
| |
yet. |
|
|
With the help of a second person, lower the |
|
|
treadmill off the cardboard stand. |
|
|
3. Identify the Right Upright Sleeve (96) and the | 3 |
|
Left Upright Sleeve (95). Slide the Right Upright |
| |
|
| |
Sleeve onto the Right Upright (74) and the Left |
|
|
Upright Sleeve onto the Left Upright (73). | 95 |
|
|
| |
| 73 |
|
| “Left” | “Right” |
|
| |
|
| 96 |
|
| 74 |
| 8 |
|