ProForm PFTL57105.2 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches

and your own phillips screwdriver

and adjustable wrench

.

 

Use the drawings below to identify the assembly hardware. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled.

Screw (78)–10

Latch Screw (46)–2

Console Bolt (76)–4

 

Silver Ground

Nut (20)–2

Upright Bolt (80)–4

 

Screw (23)–1

 

 

 

Console Star

Upright Star

Wheel Bolt (90)–2

 

Washer (77)–4

Washer (4)–4

 

1.Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (59) so the treadmill will be more stable. Do not fully fold the treadmill until it is completely assem- bled.

Attach a Wheel (94) to the Upright Base (97) with a Wheel Bolt (90) and a Nut (20). Do not overtighten the

Nut; the Wheel must turn freely.

1

59

90

 

 

 

97

 

94

 

 

 

20

6

Image 6
Contents QUESTIONS? Model No. PFTL57105.2 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedNut the Wheel must turn freely Make sure that no wires are pinched. Hand Endcaps are oriented exactly as shown Top View 107 Wire Cylinder Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTinue to hold the contacts for about 15 sec Handrail-avoid moving your hands. When yourFor the most accurate heart rate reading, con OndsHOW to USE a Preset Program Select one of the six preset programsHOW to USE a Pulse Control Program Select a pulse control programFollow your progress with the display Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page R1105A Description QtyDescription Exploded DRAWING-Model No. PFTL57105.2 101 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT