ProForm PFTL51231 user manual Measure your heart rate if desired

Page 21

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program.

To stop the walking belt at any time, press the Stop button on the console. The Time/Pace dis- play will begin to flash. To restart the program, press the Start button or the Speed increase but- ton. After a moment, the walking belt will begin to move at 1 mph. When the next “chirp” is heard, the speed and incline will change to the next settings of the CD or video program.

When the CD or video program is completed, the walking belt will stop and the Time/Pace display will begin to flash. Note: To use another CD or video program, press the Stop button or remove the key and go to step 1 on page 20.

Note: If the speed or incline of the treadmill does not change when a “chirp” is heard:

Make sure that the iFIT.com indicator is lit and that the Time/Pace display is not flashing. If the Time/Pace display is flashing, press the Start button or the Speed increase button on the console.

Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.

Make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord.

If you are using your portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

Follow your progress with the matrix and the

5 displays.

See step 5 on page 12.

6 Measure your heart rate if desired.

See step 6 on page 13.

7 Turn on the fan if desired.

See step 7 on page 13.

When you are finished exercising, remove the

8 key from the console.

See step 7 on page 15.

CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player and VCR when you are finished using them.

21

Image 21
Contents QUESTIONS? Model No. PFTL51231 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Back Right Side Before YOU BeginAssembly Page Bolts, tighten them Pulse Bar Screws. Be careful not to damage the wiresScrews 6. Be careful not to overtighten the Screws That the pin can be inserted fully into the hole. HoldHOW to Plug in the Power Cord Treadmill OperationPerformant Lubetm Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerCalories/Pulse Distance/Incline disTime/Pace display Measure your heart rate if desiredSelect one of the preset programs HOW to USE Preset ProgramsFollow your progress with the displays Select a heart rate program HOW to USE Heart Rate ProgramsEnter your age Enter a maximum speedFollow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRInsert the key into the console PressVCR. the Play button on your CD player orMeasure your heart rate if desired Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Follow your progress with the matrix DisplaysOptional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked onExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description R1103ADescription PFTL51231 Exploded DRAWING-Model HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT