ProForm PFTL51231 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 24

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1. Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Hold the treadmill frame firmly with your left hand. Using your right hand, pull the latch knob to the right and hold it. Raise the treadmill until the pin on the latch knob is aligned with the hole in the left handgrip. Then, release the latch knob. Make sure that the latch knob is fully released so that the pin is fully inserted into the hole in the left handgrip. Note: After a period of use, the latch housing may need to be adjusted to align the pin with the hole in the left handgrip (see assembly step 9 on page 9).

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the pin on the latch knob is fully inserted into the hole in the left handgrip.

1.Hold the treadmill and place one foot on the base.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot on the wheel, and carefully lower the treadmill until the base is resting in the storage position.

Handgrip

Latch

 

Knob

 

 

 

 

Pin

Latch

 

Knob

Pin

 

 

Frame

Handgrip

 

 

 

Base

 

Front Wheels

24

Image 24
Contents QUESTIONS? Model No. PFTL51231 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Page Pulse Bar Screws. Be careful not to damage the wires Bolts, tighten themThat the pin can be inserted fully into the hole. Hold Screws 6. Be careful not to overtighten the ScrewsHOW to Plug in the Power Cord Treadmill OperationPerformant Lubetm Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeDistance/Incline dis Calories/PulseTime/Pace display Measure your heart rate if desiredHOW to USE Preset Programs Select one of the preset programsFollow your progress with the displays HOW to USE Heart Rate Programs Select a heart rate programEnter your age Enter a maximum speedFollow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Audio Adapter CableInsert the key into the console PressVCR. the Play button on your CD player orMeasure your heart rate if desired HOW to USE Programs Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the treadmill and stand on the foot Follow your progress with the matrix DisplaysInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top ViewExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R1103A Qty DescriptionDescription PFTL51231 Exploded DRAWING-Model HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT