ProForm PFTL69210 user manual Assembly, Driver and rubber mallet

Page 6

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw-

driver and rubber mallet .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1.With the help of a second person, carefully raise the treadmill to the upright position as shown.

Insert one of the Extension Legs (55) into the treadmill as shown. Make sure that the Extension Leg is turned so the Base Pad (44) is on the bottom. If necessary, tip the Uprights (64) forward as you insert the Extension Leg.

Insert the other Extension Leg (not shown) in the same way.

2.With the help of a second person, carefully lower the Uprights (64) down as shown. Note: It may be helpful to place your foot on the Wheel (58) as you tip the Uprights.

Make sure that the Extension Legs (55) remain in the Uprights.

Attach each Extension Leg (55) with two Extension Screws (35) as shown.

Note: One replacement Base Pad (44) may be included. If a Base Pad becomes worn and needs to be replaced, use the replacement Base Pad.

1

 

 

64

 

55

 

44

2

44

 

35

 

55

64

44

35

 

 

55

58

44

6

Image 6
Contents QUESTIONS? Model No. PFTL69210 Serial NoCustomer HOT Line Table of Contents Important Precautions 50% Before YOU Begin Left Side Right SideAssembly Driver and rubber malletMake sure that the Extension Legs 55 remain in the Uprights Page Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram Features of the ConsoleSelect the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key fully into the consoleDistance/Laps Measure your heart rate, if desiredHOW to USE Personal Trainer Programs Select one of the personal trainer programsPut on the chest pulse sensor HOW to USE Heart Rate ProgramsFollow your progress with the displays Select a heart rate programEnter your age HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerInsert the key into the console HOW to Connect Your VCRAudio Adapter Cable PressVCR. the Play button on your CD player orWhenkey. the program is completed, remove HOW to USE Programs Directly from OUR WEB Site When the program has ended, remove the keyFollow the on-line instructions to start the program Information MODE/DEMO Mode Calories/Heart Rate display is blankOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE TROUBLE-SHOOTING Problem The power turns off during useProblem The walking belt slows when walked on Solution a. See a under The power does not turn on onTop Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Remove this Exploded Drawing and Part List from the Manual R1001A Key Qty DescriptionPFTL69210 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT