ProForm PFTL59120 user manual Problem The walking belt slows when walked on, Top

Page 26

Locate the Reed Switch (18) and the Magnet (101) on the left side of the Pulley (78). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw

(24)and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

PROBLEM: The walking belt slows when walked on

1/8”

78

24

 

18

101

Top

 

View

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c.If the walking belt still slows when walked on, please call our toll-free Customer Service Department.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each side of the walk- ing belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com CD’s and videos are played

SOLUTION: a. With the key inserted in the console, press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automati- cally rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline.

26

Image 26
Contents Customer HOT Line QUESTIONS?Model No. PFTL59120 Serial No Table of Contents Important Precautions Page Before YOU Begin Left Side Right SideAdjustable wrench Wire cutters AssemblyAssembly requires the included allen wrench Harness 49 does not fall into the Right UprightPage 114 112 116 110 109 Performant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeWhenkey. you are finished exercising, remove Distance/LapsMeasure your heart rate, if desired HOW to USE Personal Trainer Programs Select one of the personal trainer programsMeasure your heart rate if desired HOW to USE Heart Rate ProgramsFollow your progress with the displays Put on the chest pulse sensorAdjust the maximum speed limit for the program Enter your ageHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerInsert the key into the console HOW to Connect Your VCRAudio Adapter Cable PressVCR. the Play button on your CD player orWhenkey. the program is completed, remove Follow the on-line instructions to start the program HOW to USE Programs Directly from OUR WEB SiteWhen the program has ended, remove the key Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to USE the Upper Body Arms Upper Body ARM TroubleshootingHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Problem The thumb pulse sensor does not function properly TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on TopWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Part Identification Chart Part LIST-Model No. PFTL59120 Key Qty DescriptionDrawing