ProForm 831.29605.0 user manual

2.Remove the knob from the pin. Make sure that the collar and the spring are on the pin.

Insert the pin into the Left Bottom Handgrip (43), and tighten the knob back onto the pin.

Place the treadmill in the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 21).

3.Have a second person hold the Uprights (97).

Orient the U-base (89) so the Base Pads (99) are un- derneath it, and position the U-base against the base of the Uprights (97) as shown. Insert two 3” Bolts (86) into the U-base (89) and the base of the Uprights (97); if necessary, tip the Uprights forward as you insert the Bolts. Finger tighten two Nuts (20) with Washers (71) onto the Bolts.

Next, insert two 1 3/4” Bolts (76) with Washers (71) into the base of the Uprights and the U-base; if necessary, tip the Uprights forward as you insert the Bolts. Start both Bolts and then firmly tighten them.

4.Lower the treadmill Frame (59) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). With the help of a second person, carefully tip the Uprights (97) down as shown.

Firmly tighten the two Nuts (20) on the 3” Bolts (86).

2
Knob
	43
	Spring
		Collar
		Pin
3	59
		97
	76
	71
89
	20
99	86
	71
	86
	71	20
4
59		20
	20
	86
97

6