ProForm 831.293330 user manual

Page 9

8.Attach a Wheel (66) to the inner side of each Extension Leg (63) with a Wheel Bolt (64) and a Wheel Nut (104) as shown. Do not overtighten the Bolts. The Wheels should be able to turn freely.

Lift the treadmill frame (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 13), but do not latch it. Make sure that the frame is centered between the Handrails (not shown). Firmly tighten the bolts used in assembly step 4. Then, lower the frame to the floor.

	8
	104	63
	104	64
	66	64
	66

9.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.

Image 9

Contents Model No Serial No Assembly Operation Maintenance Part List and DrawingTable of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Assembly requires the included allen wrenchesMake sure that the power cord is unplugged Page Page Page Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram STEP-BY-STEP Console OperationInsert the key fully into the console Follow your progress with the three displays. Time/Distance Change the incline of the treadmill as desiredMeasure your heart rate if desired Whenkey. you are finished exercising, removeHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Page R0503A Key Qty DescriptionIf a part is missing, call toll-free DRAWINGModel Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Full 90 DAY Warranty