ProForm 831.293330 user manual

Page 7

2.With the help of a second person, carefully lower the treadmill frame and then tip the Uprights (69) down as shown. (Note: It may be helpful to place your foot on one of the Extension Legs [63] as you tip the Uprights.) Make sure that the Extension Legs remain in the Uprights.

Attach each Extension Leg (63) with two 3/4” Tek Screws (58).

Attach four Base Pads (57) with 3/4” Tek Screws (58) as shown.

Note: One replacement Base Pad (57) may be included. If a Base Pad becomes worn and needs to be replaced, use the replacement Base Pad.

3.With the help of a second person, raise the Uprights (69) to the vertical Position. Attach the Storage Latch (36) to the left Upright with two 3/4” Screws (2). Remove the Latch Knob (30) from the Latch Pin (35). Make sure that the Latch Pin Collar (33) and the Spring (32) are on the Latch Pin as shown. Insert the Latch Pin into the Storage Latch, and tighten the Latch Knob back onto the Latch Pin.

4.Identify the Right Handrail (72), which has a large hole in the left side. Feed the Wire Harness (42) up into the bracket on the Right Handrail and out of the large hole in the left side. (Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the large hole.) Press a Handrail Cap (76) onto the lower end of the Right Handrail as shown.

Insert the bracket on the Right Handrail (72) into the top of the right Upright (69) so the Handrail Cap (76) is rest- ing against the Upright. Attach the Right Handrail and the Handrail Cap with three 1” Bolts (37) and two Washers

(38)as shown. Firmly tighten the indicated Bolt, but do not tighten the other Bolts yet.

Attach the Left Handrail (not shown) as described above. Note: There is not a wire harness on the left side.

2

 

 

 

57

 

 

 

58

 

 

 

58

 

58

 

 

57

 

 

 

 

57

63

 

 

 

 

 

58

 

 

 

 

 

58

69

 

 

57

63

 

 

58

 

3

 

 

 

30

36

Large

 

Hole

 

 

 

 

 

32

 

2

 

33

 

 

 

 

 

 

 

35

 

 

69

 

4

42

 

 

Large

Hole

Bracket

37

38

72

37 69

38

Tighten

76 37

7

Image 7
Contents Model No Serial No Assembly Operation Maintenance Part List and DrawingTable of Contents Important Precautions Page Right Side Before YOU BeginBack Assembly requires the included allen wrenches AssemblyMake sure that the power cord is unplugged Page Page Page HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt STEP-BY-STEP Console Operation Console DiagramInsert the key fully into the console Whenkey. you are finished exercising, remove Change the incline of the treadmill as desiredFollow your progress with the three displays. Time/Distance Measure your heart rate if desiredHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Page Key Qty Description R0503AIf a part is missing, call toll-free DRAWINGModel Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Full 90 DAY Warranty