JVC RX-DV3SL manual Basic DVD Player Operations, Open the Disc Tray, Load a Disc, Start Playback

Basic DVD Player Operations

English

For details about DVD player operations, see pages 29 to 42.

•You can also play back MP3 and JPEG files. See pages 43 to 46.

•When using remote control, press DVD to change the remote control operation mode to the DVD player operation.

1 Open the Disc Tray

Before turning on the unit, turn on your TV and select the correct video input (see the manual supplied with your TV).

•When you use a JVC’s TV, you can turn on your TV by pressing

STANDBY/ON TV on the remote control and select the video input by pressing TV/VIDEO. (If your TV is not a JVC’s, see “Operating Other Manufacturers’ Equipment” on page 61.)

•For changing the OSD messages—the information on the TV

—into the desired language, see pages 47 and 49.

On the front panel ONLY

Press 0.

The unit is turned on and the disc tray opens.

The STANDBY lamp goes off and the illumination lamp lights up.

•When a disc is already loaded, pressing 3 turns on the unit and starts playing back the loaded disc.

2 Load a Disc

Place a disc correctly with its label side up.

		RECEIVER
	DVD/CD	TAPE/CDR
THEATER		NAME
	TV	SOURCE

		HOME
RX	-DV3	VCR
DBS

DVD

CORRECT

		MODE
	STANDBY	SURROUNDF
		ON/OF
STAN		INPUT
	N	ANALOG/DIGITAL
DBY/O
		.
		T ATT
		INPU

By pressing the following buttons, you can pause, advance, or reverse playback, and locate the beginning of the title, chapter, or track.

On the front panel

REW/( TUNING 9/FF

From the remote control

FM MODE STROBE

– TV/DBS CH +

To stop playback temporarily

Press 8.

•Pressing 3 starts playback again.

To move back the playback position by 10 seconds (for DVD VIDEO only)

Press 3 during DVD VIDEO playback.

The unit moves the playback position about 10 seconds before the current position, then resumes playback.

To advance or reverse playback rapidly

Press and hold ¢ or 4.

While you are pressing and holding ¢ (or 4), the unit advances (or reverses: for DVD VIDEO and audio CD) playback 5 times as fast as the normal speed. When you press and hold ¢ (or 4) further, the playback speed changes up to 20 times as fast as the normal speed.

•Releasing the button resumes the normal playback.

To locate the beginning of the chapter or track

Press ¢ or 4.

Press ¢ (or 4) to locate the beginning of the next (current or previous) chapter or track.

To locate the chapter or track using the number buttons

Press the number buttons (1–10, +10) to select the number of the desired chapter or track.

Ex. : To select 3, press 3.	EFFECT	CENTER
	1	2	3
To select 11, press +10, then 1.	TEST	REAR·L
To select 20, press +10, then 10.	4	5	6
	SURR ON/OFF	REAR·R
	7	8	9
From the remote control ONLY	SURR MODE – SUBWOOFER +
	10/0	+10
		100+

INCORRECT

3 Start Playback

TUNING

On the front panel From the remote control

Press 3.

The disc tray closes and the unit starts playing back the loaded disc.

•You can also close the disc tray by pressing 0 on the front panel.

About indication on the display while playing back a disc

While you are playing back a disc, the playback information appears on the display as follows:

Ex. : When DVD VIDEO is loaded

	DIGITAL AUTO
	AUTO SURROUND		SPK.
	DIGITAL L C	R		VOLUME
	SUBWFR LFE
	LS	RS
	Chapter number			Elapsed playing time
Ex. : When audio CD is loaded
	DIGITAL AUTO	PRO LOGIC
	L	R	SPK.	VOLUME
	SUBWFR

Track number Elapsed playing time

15