JVC RX-DV3SL manual Specifications, Amplifier, FM tuner IHF, AM tuner, General

Page 71

Specifications

 

Designs & specifications are subject to change without notice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Amplifier

 

 

 

Output Power At Stereo operation:

 

 

Front channels:

100 W per channel, min. RMS, driven into 8

 

 

 

W, 40 Hz to 20 kHz with no more than 0.8%

 

 

 

total harmonic distortion.

 

At Surround operation:

 

 

Front channels:

100 W per channel, min. RMS, driven into 8 Ω

 

 

 

at 1 kHz, with no more than 0.8% total harmonic

 

 

 

distortion.

 

Center channel:

100 W, min. RMS, driven into 8 Ω

 

 

 

at 1 kHz, with no more than 0.8% total harmonic

 

 

 

distortion.

 

Rear channels:

100 W per channel, min. RMS, driven into 8 Ω

 

 

 

at 1 kHz, with no more than 0.8% total harmonic

 

 

 

distortion.

Audio

 

 

 

240 mV/47 kΩ

Audio Input Sensitivity/Impedance (1 kHz):

TV, TAPE/CDR, DBS, VCR:

Audio Input (DIGITAL IN)* :

Coaxial:

DIGITAL 1

(DBS):

0.5 V(p-p)/75 Ω

 

Optical:

DIGITAL 2

(TV):

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Signal-to-Noise Ratio (’66 IHF/’78 IHF):

TV, TAPE/CDR, DBS, VCR:

87 dB/67 dB

Frequency Response (8 Ω):

TV, TAPE/CDR, DBS, VCR:

20 Hz to 20 kHz (±1 dB)

Tone Control:

Bass (100 Hz):

±10 dB ±2 dB

 

 

Treble (10 kHz):

±10 dB ±2 dB

 

Video

 

 

 

 

Video Input Sensitivity/Impedance (1 kHz):

 

1 V(p-p)/75 Ω

 

Composite video:

DBS IN, VCR IN:

 

S-video:

DBS IN, VCR IN:

(Y:luminance):

1 V(p-p)/75 Ω

 

 

(C:chrominance):

0.286 V(p-p)/75 Ω

Video Output Level/Impedance (1 kHz):

 

 

 

 

Composite video:

VCR OUT, MONITOR OUT:

 

 

 

 

1 V(p-p)/75 Ω

 

S-video:

VCR OUT, MONITOR OUT:

 

1 V(p-p)/75 Ω

 

 

(Y:luminance):

 

 

(C:chrominance):

0.286 V(p-p)/75 Ω

Component video:

DVD COMPONENT VIDEO OUT:

1.0 V(p-p)/75 Ω

 

 

(Component-Y):

 

 

(Component-PB/PR):0.7 V(p-p)/75 Ω

Color System:

NTSC

 

 

 

Horizontal Resolution:

500 lines

 

 

 

Signal-to-Noise Ratio (S/N):

63 dB

 

 

 

Synchronize:

Negative

 

 

 

FM tuner (IHF)

Tuning Range: 87.5 MHz to 108.0 MHz

AM tuner

Tuning Range: 530 kHz to 1 710 kHz

General

Power Requirements:

AC 120V , 60 Hz

Power Consumption:

200 W/255 VA (in operation)

 

2 W (in standby mode)

Dimensions (W x H x D):

435 mm x 100 mm x 403.5 mm

 

(17 3/16 in. x 3 15/16 in. x 15 14/16 in.)

Mass:

7.9 kg (17.4 lbs)

English

68

Page 70 Page 72
Image 71
Page 70 Page 72
Contents RX-DV3SL Mises en garde, précautions et indications diverses English Français Table of Contents Display Adjust button 23Parts Identification Front PanelParts Identification Remote ControlGetting Started Before Installation Putting Batteries in the Remote ControlChecking the Supplied Accessories FM antenna connection Connecting the FM and AM AntennasGetting Started AM antenna connectionSpeaker Layout Diagram Connecting the SpeakersConnecting the subwoofer speaker Connecting the front, center, and rear speakersFor audio connections Connecting Audio/Video ComponentsAbout connecting cords For video connectionsWhite Video connectionsAudio connections Their rear vary among the componentsWhite VCR connectionDBS tuner connection VCRCD recorder Cassette deck/CD recorder connectionDigital connection Select the Source to Play Turn On the Power Adjust the VolumeListening with headphones Basic OperationsChanging the Source Name Turning Off the Power With the Sleep TimerBasic Operations Input modeOn the remote control When DVD is selected as the source, you can also /DIGITALInput ATT indicator Attenuating the Input SignalChanging the Scanning Mode Activating the Recording ModeStart Playback Basic DVD Player OperationsOpen the Disc Tray Load a DiscActivate Realistic Sound Field Select Surround Mode Stop PlaybackTurn Off the Power into Standby Tuner Operations Tuning into Stations Manually Using Preset TuningSelecting the FM Reception Mode Operation Buttons Basic SettingsOperating Procedure YES ¶ For subwooferLow frequency effect attenuator-LFE Basic SettingsSet the appropriate digital terminal setting Digital input Digital in terminals-DGTSet the output terminal appropriately AV Compu Link Remote Control System on pages 57Auto surround-AUTO SR Video output mode-VOUT On the displayAdjustment items Sound AdjustmentsPress Adjust Press Control 3 or 2 to adjust Front speaker balanceDAP effect level-EFFECT Adjusting sound from the remote controlFront speaker output balance -BAL balance Tone-BASS and TrebleDAP Digital Acoustic Processor modes Creating Realistic Sound FieldsDolby Surround DTS Digital SurroundPossible × Impossible All Channel StereoReflections from behind Early reflections Direct sounds Creating Realistic Sound Fields Activating Surround ModePress Surround Mode Press Surr ModeFor using test tone Adjusting Surround Mode Using Remote ControlAdjust the sound Adjust the speaker output levels as followsDiscs you can play Disc Type DVD Player OperationsDisc Information Playable Disc TypesMenu-driven playback Disc structurePlayback Control function PBC Press on Screen Using the On-screen BarContents of the on-screen bar with the pull-down menu DVD Player OperationsPress Enter Basic Operation through the On-screen BarChanging the Time Indication Press on Screen twiceFrom the VCD/SVCD menu with PBC Locating a Desired Scene from Disc MenuPress TOP Menu or Menu From the DVD menuPress and hold Angle for a few seconds Selecting a View Angle-ANGLEPress Angle Press Angle repeatedly to select the desired view anglePress Audio repeatedly to select the desired audio language Changing the Languages-SUBTITLEPress Subtitle Press AudioFor Svcd Press Audio repeatedly to select the desired audio channelSelecting the audio channel For VCDLocating a desired position-Time Search Playing from a Specified Position on a DiscUse the number buttons 0-9 to enter the time Locating a desired chapter-Chapter SearchLocating a desired scene-DIGEST Press DigestPress cursor 5/∞/3/2 to move to the desired scene Special Picture Playback To adjust the appearance of the picture Press cursor 3 or 2 repeatedly to select VFP modeRepeat steps 2 to 4 to adjust other parameters Changing the VFP setting-VFPPlaying back tracks in random order Program Playback and Random PlaybackRepeat to program the next steps Playing back in the desired orderRepeating a desired part Repeat PlaybackRepeating a current title, chapter, or all tracks Load an MP3 disc, then press MP3 Disc PlaybackBasic Operations Press Repeat Operations through the MP3 Control ScreenLoad a Jpeg disc, then press Jpeg Disc PlaybackSlide-show Playback Press Menu or Operations through the Jpeg Control ScreenChoice Menu Operations Operation Buttons Configuration of Choice MenuPress cursor ∞ or 5 repeatedly To move to Progressive Press Enter to finish the settingPress Choice Press cursor 3 or 2 repeatedly To display Picture menuPicture menu Choice Menu OperationsLanguage menu MAX Audio menuMP3 JpegSubwoofer SPK. Setting menuTest Tone Rear SpeakerSelect this to deactivate it Others menuRestricting Playback by Parental Lock Setting Parental LockReleasing Parental Lock temporarily Changing the setting of Parental LockNew setting is stored Country/Area codes list for Parental Lock Glossary for DVD Player Connections 2 Video Cable Connection AV Compu Link Remote Control SystemTV’s Video Input 1 terminal using S-video cables Connections 1 AV Compu Link ConnectionOne-Touch Video Play Remote Control of the TV and VCR Using This Remote ControlAutomatic Selection of TV’s Input Mode Automatic Power On/OffSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components CD recorderREW Operating Video ComponentsTV Return STANDBY/ON VCRTry to operate your TV by pressing Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment Release STANDBY/ON TVTry to operate your DBS tuner by pressing Press and holdPress DBS Release STANDBY/ON DBSTry to operate your VCR by pressing Operating Other Manufacturers’ EquipmentEnter the manufacturer’s code Release STANDBY/ON VCRGeneral Notes MaintenanceCleaning Discs Cleaning the UnitGenaral TroubleshootingFor DVD Player For Jpeg TroubleshootingFor Tuner For MP3AM tuner SpecificationsAmplifier FM tuner IHFEN, FR 0502NHMMDWJEM

RX-DV3SL specifications

The JVC RX-DV3SL is a versatile and compact Home Theater Receiver designed to enhance your audio-visual experience. This model stands out for its remarkable sound quality and user-friendly features, making it an ideal choice for both casual listeners and serious audiophiles.

One of the main features of the RX-DV3SL is its powerful amplification system, which delivers clear and dynamic audio performance. With a total power output of around 100 watts per channel, it ensures that you can enjoy movies and music with rich soundscapes that fill your room. The receiver is equipped with a high-efficiency digital amplifier, which not only provides robust output but also contributes to energy savings.

The RX-DV3SL supports multiple audio formats, including Dolby Digital and DTS, allowing for an immersive surround sound experience. The receiver features multiple inputs, including HDMI, optical, and coaxial connections, making it compatible with a wide range of modern devices such as Blu-ray players, gaming consoles, and streaming devices. The inclusion of HDMI inputs also ensures high-definition audio and video transfer, providing a seamless connection to your television.

Another impressive characteristic of the RX-DV3SL is its built-in AM/FM tuner, enabling users to listen to their favorite radio stations with clarity and ease. Additionally, the receiver features an intuitive on-screen menu system that simplifies setup and navigation, allowing users to access settings and features effortlessly.

The RX-DV3SL boasts an elegant and sleek design, perfectly fitting into any home theater setup. It comes with a remote control, offering convenience and ease of operation from a distance. Furthermore, the receiver is built with quality components to ensure longevity and reliability over time.

In terms of connectivity, the RX-DV3SL includes multiple speaker outputs, allowing for versatile setup options like bi-wiring or connecting additional subwoofers. This flexibility enables users to tailor their audio experience according to personal preferences and room acoustics.

In summary, the JVC RX-DV3SL is a feature-packed home theater receiver that combines powerful performance, connectivity, and user-friendly technology. Whether you're watching movies, playing video games, or enjoying your favorite music, the RX-DV3SL delivers an exceptional audio experience, making it a fantastic addition to any home entertainment system.
Top Page Image Contents