JVC RX-5032VSL, RX-6032VSL, RX-6030VBK manual Basic Settings

Basic Settings

Basic Settings Using MULTI JOG Dial

After connecting and placing speakers, you need to make basic settings for the following items according to your listening conditions.

•Speaker information (see the next column and page 16)

•Digital input terminal sources (see page 16)

•RX-6030VBK and RX-6032VSL only: Video input terminal type (see page 16)

7Operating buttons

	DIMMER				MULTI JOG
				SETTING		ADJUST
	INPUT DIGITAL
	INPUT ANALOG
	INPUT ATT
	SETTING	MULTI JOG	ADJUST	SET		EXIT
RY	SET		EXIT

Buttons	To do
SETTING	Enter the receiver into the basic setting
	mode.
MULTI JOG	• Select an item to adjust after pressing
	SETTING.

•Adjust the selected item after pressing SET.

SET	Determine the item to adjust.
EXIT	Exit from the basic setting mode or return
	to the previous step.

7Operating procedure

Ex. Setting the subwoofer information

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1Press SETTING.

The last selected item appears on the display.

2Turn MULTI JOG dial to select an item you want to adjust.

SUBWOOFER O FRNT SPEAKERS O CNTR SPEAKER O SURR SPEAKERS O DISTANCE UNIT O FRNT DISTANCE O

CNTR DISTANCE O SURR DISTANCE O CROSSOVER O LFE ATTENUATE O D_COMPRESSION O DIGITAL IN O VIDEO IN DVD* O VIDEO IN VCR* O (back to the beginning)

*RX-6030VBK and RX-6032VSL only.

3Press SET.

The current setting of the selected item appears on the display.

4Turn MULTI JOG dial to adjust the selected

item.

Select “SUBWOOFER YES” if a subwoofer is connected.

Ex.: When “SUBWOOFER YES” is selected.

5Press EXIT.

To adjust other items, repeat steps 2 to 5.

To finish the setting, go to step 6.

6Press EXIT again.

The receiver exits from the basic setting mode.

Setting the Speaker Information

“NO” for the subwoofer, “LARGE” for the front speakers, and “SMALL” for the center and surround speakers are initial settings.

To get best possible sound, change the subwoofer and speaker settings to fit your listening conditions.

7Subwoofer information—SUBWOOFER

Register whether you have connected a subwoofer or not.

YES Select this when you have connected a subwoofer. You can adjust the subwoofer output level

(see page 21).

NO Select this when you have not connected or have disconnected a subwoofer.

7Speaker size—FRNT (Front) SPEAKERS, CNTR (Center) SPEAKER, SURR (Surround) SPEAKERS

Register the sizes of all the connected speakers.

•When you change your speakers, register the information about the speakers again.

LARGE Select this when the size of the cone speaker unit built in your speaker is greater than 12 cm

(4 3/4 inches).

SMALL Select this when the size of the cone speaker unit built in your speaker is smaller than 12 cm

(4 3/4 inches).

NONE Select this when you have not connected a speaker. (Not selectable for the front speakers)

Notes:

•If you have selected “NO” for the subwoofer setting, you can only select “LARGE” for the front speaker setting.

•If you have selected “SMALL” for the front speaker setting, you cannot select “LARGE” for the center and surround speaker settings.

English

Ex.: When “SUBWOOFER” is selected.

15