Perreaux SX25 owner manual Rear Panel Functions

Page 11

4

Rear Panel Functions

Caution!

Right and Left Speaker Binding Posts

Binding posts are clearly marked and colour coded RED Positive

(+)and BLACK Negative (-). This polarity must be observed when connecting loudspeakers, i.e. positive terminal of the SX25 to the positive terminal of the loudspeaker and negative terminal of the SX25 to the negative terminal of the loudspeaker.

Never connect the amplifier’s output terminals to any device other than a loudspeaker.

Please do not short circuit the amplifier’s output terminals.

Never connect the output of one amplifier to the output terminals of another amplifier.

Do not over-tighten the binding posts on your amplifier.

Right and Left Line Inputs

Input from source component, accepts a standard unbalanced input (RCA). The left channel connection is on the right when looking from the rear, indicated by white inner ring. For more information on input specifications, please refer to Chapter 11.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SX25 25W Power AmplifierPage This page has intentionally been left blank Perreaux Silhouette Series IntroducingIi Important Safety Instructions Iii Table of Contents Unpacking and Placement Instant Install Congratulations Front Panel Functions Rear Panel Functions When operating the switch down, power is applied to the SX25 Special Design Philosophies Minimalist Aesthetics Special Design Features Page Care and Maintenance Warranty Information Registration Form Extended WarrantyYear Extended Warranty Form Troubleshooting Guide Interconnect cables damaged 115V or 230V AC at 50Hz/60Hz 11SpecificationsWidth 216mm Depth 178mm Height 58mm THD+N Physical Dimensions Contact Details Installation Notes
Top Page Image Contents