ProForm PFTL33105.2 user manual

Page 10

10 Attach the Latch Housing (30) to the Left Upright (31) with two 3/4” Screws (2). Make sure that the large hole in the Latch Housing is on the side shown. Do not over- tighten the Screws.

Remove the knob from the pin. Make sure that the collar and the spring are on the pin as shown. Insert the pin into the Latch Housing (30), and tighten the knob back onto the pin.

10

30

Knob

31

2

Pin

Spring

Collar

11.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

10

Image 10
Contents Model No. PFTL33105.2 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Operation and AdjustmentPage Right Side Before YOU BeginBack Assembly Make sure that the power cord is unpluggedPage Nectors are not Connected PROPERLY, Console MAY be Damaged When the PowerIs Turned on Frame Bolts Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram STEP-BY-STEP Console OperationTurn on the fan if desired Follow your progress with the displayMeasure your heart rate if desired Whenkey. you are finished exercising, removeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part LIST-Model No. PFTL33105.2 Key No. Qty DescriptionR0406A Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT