ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires two adjustable wrenches 
and a phillips screwdriver | (not included). |
1.Attach two Base Pads (57) to the bottom of the Base
(59) in the indicated locations. Note: One extra Base Pad is included.
2.Firmly hold the left or right handrail as shown. Raise the handrails until the Base (59) and the front Wheels (56) are resting on the floor.
Remove the six Weight Rack Screws (106) and the metal plate (not shown) from the right side of the Base (59). Discard the metal plate.
Attach a Weight Rack (110) to the right side of the Base (59) with the six Weight Rack Screws (106).
Attach the other Weight Rack (110) to the left side of the Base (59) in the same manner (not shown).
3.Make sure that there is a Frame Guide (52) on the left side of the Frame (23). If there is not, attach the Frame Guide with two screws (100) as shown. Make sure that the thick end of the Frame Guide is at the bottom.
4.Next, the treadmill should be raised to the storage posi- tion. Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of in- jury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.
1 |
|
|
|
|
|
| 57 |
|
|
| 59 |
| 57 |
| |
2 |
| Handrails | |
|
| ||
|
|
| 110 |
|
|
| 106 |
|
|
| 106 |
|
|
| 106 |
|
| 59 | 56 |
|
| 59 | |
|
|
| |
3 |
|
|
|
| 100 | 52 |
|
|
|
| |
|
| Thick end | 23 |
|
|
| |
4 |
|
|
|
5