Assembly

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches		and your own phillips screwdriver	,
and rubber mallet	.

For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, check to see if it has been pre-assembled. To avoid damaging plastic parts, do not use power tools for assembly.

Silver Ground

Screw (99)–1 1/2” Screw (97)–4 3/4” Screw (5)–12 Weight Rack

Screw (56)–4

Star Washer (25)–4 Extension Leg Screw (14)–2

Handrail Bolt (44)–2

	1. With the help of a second person, raise the Uprights (38)	1
	to the position shown.	1
	to the position shown.
	Next, insert one of the Extension Legs (15) into the	38
	Next, insert one of the Extension Legs (15) into the
	treadmill as shown; make sure that the Extension Leg is
	turned so the Base Pad (33) is underneath it. Note: It
	may be helpful to tip the Uprights (38) in the direction
	shown by the arrow as you insert the Extension Leg.
	Attach the Extension Leg (15) with an Extension Leg
	Screw (14). Make sure to push on the head of the	14
	Extension Leg Screw while tightening it.	14
	Extension Leg Screw while tightening it.
	Attach the other Extension Leg (not shown) in the	15
	same way.	33
		33