4.Hold the Console Base (47) near the Left Handrail (71). Attach the ground wire on the Console Base to the small hole in the side of the Left Handrail with the 1/2” Ground Screw (75) as shown.
5.Set the Console Base (47) on the Right Handrail (72) and the Left Handrail (71). Attach the Console Base with four 3/4” Screws (2). Start all four Screws before tightening them; do not overtighten the Screws.
6.Touch the Right Handrail (72) to discharge any static. Press the end of the Upright Wire (42) into the socket in the bottom of the Console Base (47). The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it.
4 |
47 |
Small |
Hole |
75 |
71 |
5 | 47 |
| 72 |
| 71 |
| 2 |
| 2 |
6 |
47 |
72 |
42 |
8