8.Lower the Uprights (31, 36) until the Handrails (18) are touching the floor.
See the lower drawing. Position the Uprights (31, 36) so that the treadmill Frame (74) is centered between the Uprights.
Firmly tighten the four Upright Bolts (40) and the two Frame Bolts (32). Be careful not to overtighten the
Frame Bolts.
9.Attach the end of the ground wire from the Wire Harness (28) to the indicated small hole in the Upright Base (48) with a Silver Ground Screw (27).
Make sure that the grommet is pressed into the side of the Right Upright (36).
Raise the Uprights (31, 36) to the vertical position.
8 | 32 |
| |
| 31, 36 |
| 40 |
| 18 |
| Top View |
36 | 31 |
| 74 |
9 |
|
Grommet
36
28
48 
Ground
Wire
27
9