ProForm PFTL33105.0 user manual Frame Bolts

Page 9

8.Lower the Uprights (31, 36) until the Handrails (18) are touching the floor.

See the lower drawing. Position the Uprights (31, 36) so that the treadmill Frame (74) is centered between the Uprights.

Firmly tighten the four Upright Bolts (40) and the two Frame Bolts (32). Be careful not to overtighten the

Frame Bolts.

9.Attach the end of the ground wire from the Wire Harness (28) to the indicated small hole in the Upright Base (48) with a Silver Ground Screw (27).

Make sure that the grommet is pressed into the side of the Right Upright (36).

Raise the Uprights (36, 31) to the vertical position.

8	32
	32
	31, 36
	40
	18
	Top View
36	31
	74
9
	Grommet
	36
	28
	48
	Ground
	Wire
	27

9

Image 9

Contents QUESTIONS? Model No. PFTL33105.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Right SideBack Make sure that the power cord is unplugged AssemblyPage Console MAY be Damaged When the Power Nectors are not Connected PROPERLY,Is Turned on Frame Bolts Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt STEP-BY-STEP Console Operation Console DiagramInsert the key into the console Start the walking beltMeasure your heart rate if desired Follow your progress with the displayTurn on the fan if desired Whenkey. you are finished exercising, removeHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part LIST-Model No. PFTL33105.0R0805A HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT