ProForm PCTL88101 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 19

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) in order to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of in- jury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the treadmill until the latch pin is aligned with the hole in the catch. Insert the latch pin into the catch. Make sure that the latch pin is fully inserted into the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 30°C (85°F).

1

 

2

Open

Latch

Closed

Knob

 

Pin

 

Catch

 

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch pin is fully inserted into the catch.

1.Hold the handrails as shown and place one foot against a wheel.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot on the base, and carefully lower the tread- mill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

Base

Wheels

1.Refer to drawing 2 above. Hold the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the pin. Slowly release the latch knob.

2.Refer to drawing 1. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. Do not drop the treadmill frame to the floor. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.

19

Image 19
Contents Model No. PCTL88101 Serial No IconTable of Contents Important Precautions Page Left Side Before YOU BeginRight Side Driver and rubber mallet AssemblyPage HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate, if desired Stand on Time display-WhenCalories/Watts/Pulse display-This display SPEED/MIN-MILE display-This displayMeasure your heart rate, if desired HOW to USE Personal Trainer ProgramsInsert the key into the console Select one of the personal trainer programsHOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCR Measure your heart rate, if desired Follow the on-line instructions to start the program HOW to USE Programs Directly from OUR Internet SiteWhenkey. the program is finished, remove Optional Hand Weights Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TROUBLE-SHOOTINGTop Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesKey Qty Description R0601ALimited Warranty Ordering Replacement PartsIcon of CANADA, 900 de l’Industrie, St. Jerôme, QC J7Y 4B8 Exploded Exploded DRAWING-Model No. PCTL88101