ProForm DTL32940 user manual Troubleshooting, Problem The power turns off during use, Top

Page 16

TROUBLESHOOTING

Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 10). Use only a single-outlet surge suppres- sor that meets all of the specifications described on page 10. Important: The treadmill is not com- patible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c.Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

PROBLEM: The power turns off during use

c

Tripped

Reset

SOLUTION: a. Check the circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c.Remove the key from the console. Reinsert the key fully into the console.

d.If the treadmill still will not run, please call our Customer Service Department toll-free.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Remove the two 3/4” Screws (2) from the Hood (1), and carefully pivot the Hood off.

a

2

1

Locate the Reed Switch (10) and the Magnet (18) on the left side of the Pulley (17). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw

(56)and move the Reed Switch slightly. Retighten the Screw. Re-attach the Hood, and run the treadmill for a few minutes to check for a correct speed reading.

1/8”

17

10

 

56

18

Top

 

View

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model No. DTL32940 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Right Side Before YOU BeginBack Assembly Make sure that the power cord is unpluggedIndicated Bolt, but do not tighten the other Bolts yet Page Page HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt STEP-BY-STEP Console Operation Console DiagramInsert the key fully into the console Change the incline of the treadmill as desired Follow your progress with the three displays Time/DistanceMeasure your heart rate if desired Whenkey. you are finished exercising, removeHOW to USE the Upper Body Arms HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Problem ONE of the Upper Body Arms Squeaks During USEConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Part LIST-Model No. DTL32940 Key Qty DescriptionDTL32940 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

DTL32940 specifications

The ProForm DTL32940 treadmill is designed to elevate your fitness routine with its blend of advanced features and user-friendly technology. Tailored for both beginners and seasoned athletes, this treadmill stands out in a crowded market by offering functionality, comfort, and versatility.

One of the standout features of the ProForm DTL32940 is its powerful motor. Equipped with a robust 2.0 CHP motor, this treadmill provides a smooth and consistent performance, capable of supporting various workout intensities. Users can adjust their running speed up to 10 miles per hour, allowing for both challenging sprints and comfortable walks. This speed range is perfect for interval training, permitting users to seamlessly switch between quick bursts of speed and recovery phases.

The DTL32940 also boasts a spacious running surface. With a generous 20" x 55" belt, users have ample room to stride comfortably, reducing the risk of injury while enhancing performance. The treadmill also features a cushioned deck, designed to minimize impact on joints, making it suitable for individuals of all fitness levels.

Another key characteristic of this treadmill is its foldable design. The ProForm DTL32940 incorporates a space-saving, EasyLift Assist mechanism, which allows users to effortlessly fold and store the treadmill when not in use. This is an excellent feature for those with limited space at home.

The integrated technology is yet another appealing aspect of the ProForm DTL32940. It includes a 5-inch display console that tracks essential workout metrics such as speed, distance, time, and calories burned. Additionally, the treadmill features 18 built-in workout programs designed by certified personal trainers. These programs cater to different fitness goals, from weight loss to endurance training, ensuring that users can find an engaging workout.

Moreover, the ProForm DTL32940 is compatible with iFit, a subscription-based personal training service that offers a vast library of global workouts, interactive training sessions, and the ability to track progress over time. This integration allows for a more dynamic and customized fitness experience.

In summary, the ProForm DTL32940 treadmill combines a powerful motor, a spacious running surface, space-saving design, and advanced technology to deliver an exceptional workout experience. Whether you are aiming to shed pounds, build endurance, or maintain fitness, this treadmill provides the tools and features necessary to help users achieve their goals.
Top Page Image Contents