ProForm DTL3495.0 user manual

Page 9

7.Attach the Storage Latch (66) to the left Upright (38) with two 3/4” Screws (5) as shown. Do not overtighten the

Screws.

8.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.

Image 9

Contents QUESTIONS? Model No. DTL3495.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Page Screws before tightening them Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram STEP-BY-STEP Console OperationInsert the key into the console Follow your progress with the three displays Time/Distance Change the incline of the treadmill as desiredMeasure your heart rate if desired Whenkey. you are finished exercising, removeHOW to USE the Upper Body Arms HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The upper body arms squeak during use Problem The walking belt slows when walked onExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key Qty Description Part LIST-Model No. DTL3495.0R0305A Exploded DRAWING-Model No. DTL3495.0Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT