THE INFORMATION MODE/DEMO MODE | HOW TO LEVEL THE TREADMILL |
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown:
If the treadmill wheels are touching the floor or if the treadmill rocks slightly, turn one or both of the leveling feet under the upright base until the wheels are off the floor and the rocking motion is eliminated. Note: If necessary, tip the treadmill and use a phillips screwdriver to turn the leveling feet.
Leveling |
Feet |
Wheel |
The Distance/Incline display will show the total number of miles (or kilometers) that the walking belt has moved.
The Time/Pace display will show the total number of hours the treadmill has been used.
An “E” for English miles or an “M” for metric kilometers will appear in the Speed dis- play. Press the Speed ▲ but- ton to change the unit of measurement.
IMPORTANT: The Calories/Pulse display should be blank. If a “d” appears in the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will au- tomatically light in a preset sequence, although the buttons on the console will not operate. If a “d” appears in the Calories/Pulse display when the information mode is selected, press the Speed ▼ button so the display is blank.
To exit the information mode, remove the key.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor features hands- free operation and en- ables you to use the con- sole’s heart rate pro- grams. To purchase a chest pulse sensor, call
CHANGING THE ISOLATOR SPRINGS
The treadmill features Isolator Springs (6) that cushion the walking platform. A pair of Gray Isolator Springs is preinstalled on the treadmill. For a firmer walking plat- form, the Gray Isolator Springs can be removed and the included pair of Blue Isolator Springs can be in- stalled.
6 | 5 |
| |
10 |
|
| 7 |
12 |
|
Fold the treadmill to the storage position (see page
21). Using an allen wrench, remove the two Isolator Bracket Bolts (12) from one of the Isolator Brackets (10). Remove the Gray Isolator Spring (6) from the Isolator (7) and slide a Blue Isolator Spring onto the Isolator. Insert the Isolator back into the circular chan- nel in the Isolator Top Cap (5), and reattach the Isolator Bracket with the Isolator Bracket Bolts; start both Isolator Bracket Bolts before tightening either of them.
Replace the other Gray Isolator Spring (6) in the same way.
20