ProForm 590 QS user manual To connect the tread- mill to a home stereo

HOW TO USE I-FIT.COM CDÕS AND VIDEOS

To purchase i-Fit.com CDÕs and videos (not included), visit your local department store or sporting goods store or go to www.i-fit.com.

To use i-Fit.com CDÕs, you must first connect the treadmill to your home stereo, portable stereo, or computer with CD player. To do this, follow steps A to D below.

To use i-Fit.com videos, you must connect the tread- mill to your VCR or TV. To do this, follow steps A to C below.

A. Plug one end of the in- cluded audio cable into the jack near the treadmill power cord.

Audio

Cable

A. Plug one end of the in- cluded audio cable into the jack near the tread- mill power cord.

Audio

Cable

B. To connect the treadmill to a VCR, plug the other end of the audio cable into the included adapter and plug the adapter into an AUDIO OUT jack on the VCR.

VIDEO AUDIO

OUT

IN

Adapter

Audio

Cable

B. To connect the tread- mill to a home stereo,

plug the other end of the audio cable into the in- cluded adapter and plug the adapter into a LINE OUT or an AUDIO OUT jack on the stereo.

VIDEO AUDIO

OUT

IN

Adapter

Audio

Cable

C. To connect the tread- mill to a TV, plug the other end of the audio cable into the included adapter and plug the adapter into an AUDIO OUT jack on the TV.

OUT

VIDEO AUDIO

IN

Adapter

Audio

Cable

C. To connect the tread- mill to a portable stereo, plug the other end of the audio cable into a LINE OUT or an AUDIO OUT jack on the portable stereo.

D. To connect the tread- mill to a computer, plug

the other end of the audio cable into a LINE OUT or an AUDIO OUT jack on the computer.

PHONES LINE OUT

Audio

Cable

LINE OUT

Audio

Cable

Note: If your VCR is connected to a home stereo, you may connect the audio cable to the home stereo as described in step B at the left. Remember, you must be able to listen to the audio through speakers or headphones in order to use i-Fit.com CDÕs or videos.

When the audio cable is properly connected, make sure that the on/off switch near the treadmill power cord is in the on position. Next, make sure that the power cord is properly plugged in. Follow the steps below to use an i-Fit.com CD or video.

Note: Depending on the model of your stereo or com- puter, the jacks may be labeled differently. You may need to connect the audio cable to a SPEAKER jack or a HEADPHONE jack. To do this, you must purchase a Y-adapter at your local electronics store. CAUTION:

You must be able to listen to the audio through speakers or headphones in order to use i-Fit.com CDÕs or videos.

1Insert the key fully into the console.

When the key is inserted, the four dis- plays and various indica- tors on the console will light.

12