ProForm 30755.0 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver

.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat- tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

1" Tek Screw (83)–2

Handail Bolt (64)–4

Extension Leg Nut (67)–2

Front Endcap

2.25" Extension Leg Bolt (92)–2

Screw (14)–2

 

3/4" Screw (2)–2

2.5" Extension Leg Bolt (65)–2

1.Make sure that the power cord is unplugged.

With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (58) so the treadmill is more sta- ble. Do not fully fold the treadmill until it is completely assembled.

Insert an Extension Leg (89) into the base of the Uprights (84). Hold an Extension Leg Nut (67) in the bottom of the Extension Leg, and thread a 2.5" Extension Leg Bolt (65) into the top of the Extension Leg. Next, thread a 2.25" Extension Leg Bolt (92) into the bottom of the Extension Leg. Firmly tighten the Extension Leg Bolts.

Slide a Front Endcap (44) onto the base of the Uprights (84). Partially tighten a Front Endcap Screw (14) into the Front Endcap and the base.

1

 

 

84

 

14

 

 

44

65

 

 

89

 

 

 

67

92

 

 

58

 

 

6

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents QUESTIONS? Model No Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedTreadmill until it is completely assem Bled Extension Leg. Firmly tighten the Extension Leg BoltsWire Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeChange the incline of the treadmill as desired Follow your progress with the displayMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Calorie Workout Press the Start button to start the workoutHOW to USE a Cross Training Workout Select a cross training workoutPress the Start button to start the program Perform the first strength exercise when prompted Continue the cross training workoutInformation Mode Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0607A Qty DescriptionDescription Drawing ExplodedExploded Drawing B-Model No Exploded Drawing C-Model No Exploded Drawing D-Model No Ordering Replacement Parts Limited Warranty
Top Page Image Contents