Spectra TP-10 warranty Replacing Batteries, Setting the Alarm Time, Turning Alarm ON/OFF

Page 1

SETTING THE ALARM TIME

1.Press and hold MODE until you hear “Enter your step length”.

2.Repeatedly press MODE until you hear “ALARM SET”. “AL.SET” appears on the display and the alarm time flashes.

3.Repeatedly press or hold down “UP” until the correct hour appears.

4.Repeatedly press or hold down “DOWN” until the correct minute appears.

NOTE

For 12H time format, there is a PM INDICATOR, P, located in the left-most of the LCD display. Be sure to observe the PM indicator when setting the time to make sure the time is set correctly for AM or PM. If the PM indicator is 'On', the time displayed is "PM". If the PM indicator is 'Off, the time displayed is "AM ".

5.Press MODE repeatedly and release until you hear “TIME”. The current time will be displayed on the LCD.

TURNING ALARM ON/OFF

To turn on the alarm, in any mode, press and hold down UP until you hear “Alarm On”.

” appears on the Display.

Note: The Pedometer will announce the time for 60 seconds and stops when it reaches the chosen alarm time.

To turn off the alarm, in any mode, press and hold UP until you hear “Alarm Off”.

” disappears from the Display.

REPLACING BATTERIES

If the sound weakens, distorts, or the display becomes dim, replace the batteries. This pedometer uses three AG13 (or LR44) cells; follow these steps when installing new batteries.

1.Press down and slide out the battery cover( , )

2.Remove the old cells and install three new AG13 (or LR44) cells as indicated by the polarity symbols (+ and -) marked on the tray.

3.Replace the battery cover until it snaps into place.

Wait for about 5 seconds after the batteries are installed, the pedometer sounds two beeps. If the LCD displays blank or random numbers, press RESET on the back to reset.

1

2

RESETTING THE UNIT

If the pedometer becomes erratic or starts functioning abnormal, such as “frozen display”, “broken segments in the display”, “frozen button operation” etc, you need to re- initialize the unit by pressing RESET using a pointed object such as paper clip. The RESET button is located on the back of the unit.

Note: You have to reset the clock and alarm time after resetting your Pedometer.

CARE AND MAINTENANCE

1.Clean your unit with a damp (never wet) cloth. Solvents or detergents should never be used.

2.Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

90 DAY LIMITED WARRANTY AND SERVICE

VALID IN THE U.S.A ONLY

SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable. Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof, except batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of the date of original consumer purchase, such as a duplicated copy of a sales receipt.

You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the product is repaired or replaced under warranty, the return charges will be at SPECTRA's expense. There are no other express warranties other than those stated herein.

This warranty is valid only in accordance with the conditions set forth below:

1.The warranty applies to the SPECTRA product only while:

a.It remains in the possession of the original purchaser and proof of purchase is demonstrated

b.It has not been subjected to accident, misuse, abuse, improper service, usage outside the descriptions and warnings covered within the owner's manual or non-SPECTRA approved modifications

c.Claims are made within the warranty period

2.This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA owner's manual specifications, or failure to provide reasonable care and necessary maintenance as outlined in the owner's manual.

3.Warranty of all SPECTRA products applies to residential use only and is void when products are used in a nonresidential environment or installed outside the United States.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and send it prepaid by insured parcel post or UPS to SPECTRA at the address shown below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown above, please include a proof of purchase (dated cash register receipt) so that we may establish your eligibility for warranty service and repair of the unit without cost. Also include a note with a description explaining how the unit is defective. A customer service representative may need to contact you regarding the status of your repair, so include your name, address, phone number and e-mail address to speed the process.

IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $10.00 to cover the cost of repair, handling and return postage. All out of warranty returns must be sent prepaid.

It is recommended that you contact SPECTRA first at 1-800-777-5331 or by e-mail at info@spectraintl.com for updated information on the unit requiring service. In some cases the model you have may be discontinued and SPECTRA reserves the right to offer alternative options for repair or replacement.

SPECTRA MERCHANDISING INTERNATIONAL, INC. 4230 North Normandy Avenue,

Chicago, IL60634, USA.

1-800-777-5331

To register your product, visit the link below on the website to enter your information. Http://www.spectraintl.com/wform.htm

TP-10

TALKING PEDOMETER WITH PULSE METER

OPERATING INSTRUCTIONS

PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING

THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE.

4

Printed in China

Image 1
Contents Turning Alarm ON/OFF Setting the Alarm TimeResetting the Unit Care and MaintenanceKnow More about Your Talking Pedometer Setting the ClockOperating Your Pedometer

TP-10 specifications

The Spectra TP-10 is a state-of-the-art handheld thermal imaging camera, designed for professionals who require precise temperature measurements and high-quality thermal images. This innovative device combines advanced technology with user-friendly features, making it an essential tool for various applications, including electrical inspections, building diagnostics, HVAC analysis, and more.

One of the standout features of the Spectra TP-10 is its high-resolution thermal sensor, which provides crisp images with a thermal resolution of up to 320 x 240 pixels. This enables users to identify heat sources and temperature anomalies with exceptional clarity. The device also boasts a wide temperature measurement range, typically spanning from -20°C to 400°C, allowing it to cater to diverse environments and applications.

The TP-10 is equipped with cutting-edge digital signal processing technology, enhancing image quality and providing real-time temperature readings. The camera features adjustable emissivity settings, which ensure accurate measurements across different materials. This adaptability is crucial for professionals working in electrical, mechanical, and building industries, where various surfaces need specific emissivity adjustments.

User-friendliness is a key aspect of the Spectra TP-10. The device is designed with an intuitive interface and a high-resolution LCD screen, which simplifies navigation and enhances user experience. It features multiple display modes, including thermal, visual, and picture-in-picture modes, allowing users to analyze and compare thermal images easily.

Another significant characteristic of the TP-10 is its integrated Wi-Fi connectivity, which enables seamless transfer of images and data to smartphones, tablets, or computers. This feature allows for easy sharing of findings with clients or colleagues and facilitates efficient reporting. Users can also utilize the companion mobile app for further analysis and to access useful tools.

Built with durability in mind, the Spectra TP-10 is resistant to water and dust, making it suitable for use in challenging environments. Its ergonomic design ensures comfort during extended use, while its robust construction guarantees longevity.

In summary, the Spectra TP-10 is an exceptional thermal imaging camera that merges high-resolution imaging, advanced measurement capabilities, and user-friendly features. Its versatility and reliability make it an indispensable tool for professionals across various industries, ensuring they have the information needed to make informed decisions. Whether for routine inspections or specialized diagnostics, the TP-10 stands out as a top-of-the-line thermal imaging solution.