Trouble-Shooting Guide

How the Patented ProSpot Fitness® System Works:

Starting from the Computer Brain, a signal is sent from the left & right side, thru the L & R Grey Base Frame Wire Harness (white lead), to the Spiral Cord Harness (brown lead), to the Slider Block Cable Knuckle connector, to inside Barbell Cable to the Sensor on the Barbell. When skin contacts is made with Barbell Sensors, the signals return to the Computer Brain, at which a 12-volt charge is sent via the wire harness's (red & black leads), to the solenoids, to release the spring loaded Slider Block Locking Pins when the Barbell is lifted, allowing the Barbell to move up and down. When skin contact with Barbell Sensor is broken by either hand, the Computer Brain reads this and stops the 12-volt charge to the solenoids, at which time, the spring loaded Locking Pins instantaneously engages the hole on the Guide Post and locks the Barbell from any downward movement.

ALWAYS REMEMBER: After performing any service on the unit, RESET the Computer on your ProSpot system before using it. Just unplug the power supply Electronic Box, wait 30 seconds and plug back in. Resetting the Computer allows it to recalibrate and work to its greatest efficiency.

Electrical Service Inspection Checklist:

1.Check for proper functioning of wall receptacle. (Test plug for power)

a.If bad, find new AC power supply.

2.Check wall transformer connection to Electronic Box. Should not be bent or loose.

a.If bad, replace Electronic Box.

3.Check for green flashing light, the indication power to Electronic Box.

a.If no green light, test 12V Wall Adapter for 12-17 volts output.

4.Inspect white connectors from Gray Base Frame Wire Harness connection on Electronic Box for loose wires.

a.If loose, plug in tight.

b.If broken, replace Gray Base Frame Wire Harness.

5.Inspect Gray Base Frame Wire Harness for possible pinching in frame during assembly.

a.Replace Gray Base Frame Wire Harness if damaged or defective.

6.Inspect Gray Base Frame Wire Harness connection to Spiral Cord Harness.

a.If loose, plug in tight.

b.If broken, replace Gray Base Frame Wire Harness or Spiral Cord Harness.

7.Inspect Spiral Cord connection to Solenoids, Red and Black.

a.If loose, plug in tight.

b.If broken, replace Spiral Cord Harness.

8.Inspect Spiral Cord Brown Lead Sensor Cable Knuckle plug.

a.If loose, plug in tight.

b.If broken, replace Spiral Cord Harness.

9.Check contact of Sensor Collar Brass Pin with Cable Knuckle plate.

a.If no contact, adjust Sensor Collar closer. (See Weight Bar / Cable-Knuckle Assembly Diagram)

--13 --

P-50 specifications

The ProSpot Fitness P-50 is an innovative piece of equipment designed for fitness enthusiasts who are looking to elevate their training experience. Known for its versatility and advanced technology, the P-50 provides users with a comprehensive workout solution suitable for various exercise routines, from strength training to cardio.

One of the standout features of the P-50 is its adjustable resistance system, which allows users to easily modify the intensity of their workouts. This system caters to all fitness levels, enabling beginners to build strength gradually while allowing advanced users to challenge themselves with higher resistances. The smooth operation of this system is made possible thanks to its high-quality mechanics, ensuring a seamless transition between different resistance levels.

The P-50 incorporates state-of-the-art digital technology, offering a user-friendly interface that helps track workout progress and performance metrics. The built-in display provides real-time data on key parameters such as time, reps, sets, and calories burned. This feature not only motivates users to push their limits but also assists in maintaining a well-structured workout routine.

In addition to its technological features, the ProSpot Fitness P-50 is engineered with user comfort in mind. The equipment boasts an ergonomic design, complete with a comfortable seat and backrest that support proper posture during workouts. This attention to ergonomics helps minimize the risk of injury, making the P-50 suitable for users of all ages.

Another notable characteristic of the P-50 is its compact footprint. Despite offering a wide range of workout capabilities, it is designed to fit seamlessly in any home gym or fitness space. This makes it an ideal solution for those who may have limited space but still want access to a versatile workout station.

Lastly, the P-50 is constructed from high-quality materials, ensuring durability and longevity even with regular use. The solid frame and robust components underscore ProSpot Fitness's commitment to delivering reliable and effective workout gear.

In summary, the ProSpot Fitness P-50 stands out for its adjustable resistance system, advanced digital features, ergonomic design, compact size, and durable construction, making it a top choice for anyone serious about their fitness journey. Whether you're a seasoned athlete or just starting, the P-50 can help you achieve your fitness goals efficiently and effectively.