Oregon Scientific PE830 user manual Connecting to Your PC, Backlight / Keypad Lock / Reset

Page 10

3. Press again to view the activity goal value.

If no key is pressed when the alarm sounds, a back-up beep will sound again after 5 minutes.

CONNECTING TO YOUR PC

Data can be transferred to a PC directly from the pedometer or by using the base.

To connect the pedometer to a PC:

1.Insert the USB cable into your PC.

2.Unclip the cover of the USB port on the pedometer.

3.To connect directly to the pedometer: insert the USB cable into the port on the pedometer.

4.To connect via the base: Insert the USB cable into the base. Then, place the pedometer onto the base so that the base USB connector is inserted into the pedometer USB port.

EN

•When connected, ‘PC’ will appear on the LCD screen and the LED will be lit.

•When data is being transferred the green LED will flash.

If connection is interrupted, please remove the USB cable from your PC and re-insert.

BACKLIGHT / KEYPAD LOCK / RESET

To turn the backlight ON for 3 seconds, press .

9

PE830_EU_M_EN_R1.p65

9

2006.8.16, 4:47 PM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Pedometer with PC Download Model PE830 Contents IntroductionBack View Overview Front ViewMODE/SET button LCD Getting Started SET UPImportant for Accuracy Useful Tips When changing settings you canTo calculate stride length Press Mode to switch between the 6 operation modes Change Individual Clock or User Profile SettingsSwitching Between Operation Modes Daily To set step, distance or calorie target Timer Target To use targetMemory To set timerTo use timer View Total Weekly RecordsClear ALL Records AlarmExercise Schedule Reminder Backlight / Keypad Lock / Reset Connecting to Your PCTo connect the pedometer to a PC Precautions BatteriesSpecifications About Oregon ScientificEU-DECLARATION of Conformity
Top Page Image Contents