Oregon Scientific PE828 Memory, View Total Weekly Records, View Daily Records, To use timer

2.Press and hold SET for 2 seconds to enter setting mode.

3.Press / to select countdown or count-up timer and press SET. If the countdown timer is selected you will need to set the hr:min:sec by pressing / to change a value and SET to confirm.

To use timer:

•Press to start / stop the timer.

•Press and hold to reset the timer.

•Press repeatedly to view timer step, distance and calories values.

When you are in the timer display will show. If you are in another mode, will flash to indicate the timer is running.

MEMORY

The pedometer has a 7-day memory function. You can view total weekly or daily step, distance and calorie records.

VIEW TOTAL WEEKLY RECORDS

1. Press MODE to navigate to Memory Mode.

2.Press to toggle between the total weekly step, distance and calorie display.

VIEW DAILY RECORDS

1.Press MODE to navigate to Memory Mode.

2.Press to enter the daily record display.

3.Press repeatedly until you reach the day you wish to view. When you have selected the day you wish to view a 1-second display will show to advise you if you reached that days target or not:

•Target achieved =

smiley face and high beep sound.

•Target not achieved

= sad face and low beep sound.

4.Press to toggle between your chosen days step, distance and calorie display.

IMPORTANT At midnight all accumulated daily data will be stored for a period of 7 days. Therefore, once a memory has been stored for 7 days it is replaced with new data from the 1st day of the new week.

7

EN

PE82X_M_EN_V2.p65 7 2005.7.19, 12:17 PM