CHANGE INDIVIDUAL CLOCK OR USER PROFILE SETTINGS
If after the initial setting of the clock / user profile (as detailed in previous section), you wish to change the clock time or edit one of the user profile settings, simply:
1.Press MODE to navigate to Clock or User Profile Mode.
2.Profile Mode only; use 
/ 
to scroll to the setting you wish to change.
3.Press and hold SET to enter setting mode.
4.Press 
/ 
to change a value and SET to confirm.
ALARM
When in the Clock Mode, press 
to toggle between the Clock and Alarm Mode.
To set the alarm:
1.Press MODE to navigate to Clock Mode.
2.Press 
to switch
to Alarm Mode.
3.Press and hold SET to enter the setting mode.
4.Press 
/ 
to change a value and SET to confirm and move on to the next setting.
5. The setting sequence is:
• Hour | • Minute | • On / Off |
To stop the alarm sound, press any key
PULSE METER / STRESS INDEX (AVAILABLE IN PE826 ONLY)
For
To calibrate your stress index baseline:
The index is highly individual, so you need to calibrate your personal baseline before you use this function to monitor your stress status.
Make sure you relax for 2 to 3 minutes before you start the calibration:
1.Press 
to enter Pulse Mode.
2.Press 
to enter
calibration setting.
3. Press and hold SET to start calibration.
9
EN
PE82X_M_EN_V2.p65 | 9 | 2005.7.19, 12:17 PM |