Omron Healthcare HJ-150 instruction manual Using the Memory Function

Page 7

USING THE MEMORY FUNCTION

This unit can store and display up to seven days of previous data.

The current day’s data is automatically stored in memory when the time reaches 12:00AM. The display will return to 0.

NOTE:

The time must be correctly set in the unit.

How to view data stored in the memory

Press the MEMO Button.

The previous day’s data is displayed. Continue to press the MEMO Button to display all seven days of data.

NOTE:

If no button is pressed for more than 1 minute, the display will return to the current day’s data.

Press and hold the MEMO Button to return to the current day’s data.

USING THE SYSTEM RESET FUNCTION

Use the SYSTEM RESET function in the following cases:

•When the display becomes unrecognizable

•When you want to delete all data

Press the SYSTEM RESET Button on the back of the unit.

All the data in memory is deleted and settings return to default values.

To reset the time refer to “Setting the Time” on page 7.

12

13

Image 7

Contents Pedometer Model HJ-150 Introduction Table of ContentsOperating the Device Important Safety InformationMemo Button Setting the TimeClip/Battery Cover SET Button Know Your UnitPress the SET Button to set the hour All the settings are completedWhen Steps are Counted Attaching the PedometerVibrations from a moving vehicle Battery Saving ModeWalking at an inconsistent pace Irregular unit movementPress the System Reset Button on the back of the unit Using the Memory FunctionHow to view data stored in the memory Press the Memo Button Use the System Reset function in the following casesInsert the new battery Battery InstallationRemove the battery cover Remove the old batteryTroubleshooting Tips Care and MaintenanceFCC Statement SpecificationsLimited Warranty WarrantyPage Omron Healthcare, Inc