Chapter 5: Local Management
Example:
|
|
|
|
|
|
|
|
| |
| Interface + Description | MTU | Speed | Admin | Oper | MAC Addr |
|
| |
| # 1 | (ethernet | 1514 | 10000000 | up | up | 0x00 0x00 | 0x1d 0x07 0x50 0x0e |
|
| # 2 | (ethernet - csmacd) | 1514 | 10000000 | up | up | 0x00 0x00 | 0x1d 0x07 0x50 0x0f |
|
| # 3 | (ethernet - csmacd) | 1514 | 10000000 | up | up | 0x00 0x00 | 0x1d 0x07 0x50 0x10 |
|
| # 4 | (ethernet - csmacd) | 1514 | 10000000 | up | up | 0x00 0x00 | 0x1d 0x07 0x50 0x11 |
|
|
|
|
|
|
|
|
| ||
| Destination |
| Interface |
|
|
| |||
| # Default Route | DirectConnection | 1 |
|
|
|
| ||
| # 134.141.0.0 | DirectConnection | 2 |
|
|
|
| ||
| # 134.141.0.0 | DirectConnection | 3 |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ping: |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
Syntax: |
| ping [IP address] |
|
|
| ||||
Description: |
| The ping command generates an outbound ping | |||||||
|
|
|
| request to check the status (alive/not alive) of a | |||||
|
|
|
| device at a specified IP address. | |||||
Options: |
| Not Applicable |
|
|
|
| |||
Example: |
|
|
|
|
|
|
|
122.144.40.10 is alive
reset:
Syntax:reset
Description:This reset command initiates a hardware reset of the device. The reset command initializes the CPU processor, runs the onboard diagnostics, and restarts the software image, which restores the user configuration settings from NVRAM. The user will be queried to confirm the reset command to ensure against unwanted resets.
|