Cabletron Systems 2E48-27R, 2E49-27R 5.14 HIGH SPEED INTERFACE CONFIGURATION MENU

High Speed Interface Configuration Menu Screen
2E48-27R/2E49-27R User’s Guide 5-49
5.14 HIGH SPEED INTERFACE CONFIGURATION MENU
SCREEN
The High Speed Interface Configuration Menu screen, Figure 5-22,
applies to the Fast Ethernet Interface Modules and the High Speed
Interface Module.
To access the High Speed Interface Configuration Menu screen from the
Device Specific Configuration Menu screen, use the arrow keys to
highlight the HIGH SPEED INTERFACE CONFIGURATION menu
item and press ENTER. The High Speed Interface Configuration Menu
screen displays.
Figure 5-22 High Speed Interface Configuration Menu Screen
NOTE This screen does not display unless one or two Fast Ethernet
Interface Modules and a High Speed Interface Module (HSIM)
are installed.
If only Fast Ethernet Interface Modules or an HSIM is installed,
than the respective Fast Ethernet Interfaces screen or the
HSIM Setup screen displays instead of the High Speed
Interface Configuration Menu screen.
Firmware Revision: XX.XX.XX
High Speed Interface Configuration Menu
FAST ETHERNET INTERFACES
HSIM
23143-53
Device Type: 2E48-27R
BOOTPROM Revision: XX.XX.XX
2E48-27R LOCAL MANAGEMENT
RETURN
EXIT