Cabletron Systems 2E49-27R, 2E48-27R manual High Speed Interface Configuration Screen

	High Speed Interface Configuration Screen
Event Message Line
	2E48-27R LOCAL MANAGEMENT
	High Speed Interface Configuration
Device Type: 2E48-27R		Firmware Revision: XX.XX.XX
		BOOTPROM Revision: XX.XX.XX
	Port 25		Port 26
Port Type	FE-100TX		Unknown
Link Status	Link		N/A
Current Oper. Mode	100Base-TXFD		[N/A]
Desired Oper. Mode	[Auto-Negotiation]		[N/A]
Advertised Ability	[100Base-TXFD]	[Disabled]	[N/A]
SAVE	EXIT
				RETURN
			23141-24

Figure 5-23 High Speed Interface Configuration Screen

The following briefly defines each field of the High Speed Interface Configuration screen.

Port Type (Read-only)

Displays the type of interface (FE-100FX, FE-100TX, FE-100F3, or Unknown) installed in ports 25 and 26. Figure 5-23shows that there is an FE-100TX interface installed in port 25 and no interface (indicated by Unknown) in port 26.

Link Status (Read-only)

Indicates whether or not there is a physical connection from this port to another 10BASE-T or 100BASE-TX/FX device. One of the following values displays:

•Link – There is a link signal present and a valid physical connection to another device.

•No Link – There is no link signal present and no valid physical connection to another device.

2E48-27R/2E49-27R User’s Guide 5-51