ProForm dtl44941 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 14

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the tread- mill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical posi- tion.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left thumb, press the storage latch to the left. Raise the treadmill until the storage latch closes over the catch. Make sure that the storage latch is fully engaged over the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sun- light. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

Engaged

Storage

Latch

Catch

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the frame is se- curely held by the storage latch.

1.Hold the upper ends of the handrails. Place one foot on the base as shown.

2.Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while mov- ing the treadmill. Do not move the treadmill over an un- even surface.

3.Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.

Base

Front Wheels

14

Image 14
Contents Customer HOT Line QUESTIONS?Model No. DTL44941 Serial No Table of Contents Important Precautions Page Back Before YOU BeginRight Side Assembly Make sure that the power cord is unpluggedLower Tek Screw, without the Round Base Pad, first Pinch the Upright Wire. Firmly tighten the Bolt. AttachUprights. Make sure that the Extension Legs remain Page Page Performant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Insert the key into the console Console DiagramSTEP-BY-STEP Console Operation Pressbelt. the Speed + button to start the walkingWhenkey. you are finished exercising, remove Change the incline of the treadmill as desiredMeasure your 5 heart rate if de- sired HOW to USE the Hand Weights HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Top TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part LIST-Model No. DTL44941 Key Qty DescriptionDTL44941 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty