JVC FS-G2 manual Maintenance, English, General Notes, Cleaning the unit, Handling discs

Page 52
Manual background

English

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

General Notes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

Store discs and tapes in their cases, and keep them in cabinets or on shelves.

Cleaning the unit

Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the unit may deteriorate in quality, become damaged or have its paint peel off, be careful about the following:

DO NOT wipe it with a rough cloth.

DO NOT wipe it too vigorously.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substance such as an insecticide to it.

DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

Remove the disc from its case by holding it at the edge while pressing

the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional Manual backgroundManual backgroundManual background record cleaner, spray, thinner, or benzine—to clean

the disc.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

If the tape is loose, it may get stretched, cut, or caught in the cassette.

Be careful not to touch the tape surface.

Avoid storing tapes in any of the following places:

– In dusty places

– In direct sunlight or heat

In moist areas

On a TV or speaker

Near a magnet

To keep the best recording and playback sound quality

You need to clean the heads.

Clean the heads after every 10 hours of use with

a wet-type head cleaning tape (available at electronic and audio shops).

When the head becomes dirty, the following symptoms will occur:

Sound quality is reduced.

Sound level decreases.

Sound drops out.

Do not play dirty or dusty tapes.

Do not touch the highly-polished head with any metallic or magnetic tools.

Capstan

Head

Pinch Roller

To demagnetize the head

Turn off the unit, and use a head demagnetizer (available at electronic and audio shops).

21

Image 52
Contents COMPACT COMPONENT SYSTEM INSTRUCTIONSFS-G2 -Consistsof CA-FSG2and SP-FSG2 LVT1345-001BWarnings, Cautions and Others For U.S.ACAUTION-STANDBY/ON button DANGERContents Listening to FM and AM BroadcastsPrecautions InstallationPower sources IntroductionLocation of the Buttons and Controls Main Unitp q w e Top viewLocation of the Buttons and Controls continued SLEEPPRGM SOUND REC 12 3 MP3 ALL RANDOM MONO STRemote Control Putting the Batteries into the Remote Control Getting StartedUnpacking ConnectionsConnecting Other Equipment NOW you are ready to plug in the unit1Connect the supplied AM loop antenna to the AM LOOP terminalSetting the Clock Turning On the PowerOn the remote control ONLY On the remote control ONLY 1 Press CLOCK/TIMERAdjusting the Volume Adjusting the Tone Bass/Treble1 Press BASS/TREBLE once to adjust TREBLE TREBLE twice to adjust the trebleTuning in to a Station Presetting Stations1 Tune in to the station you want to preset 3 Press ¢ or 4 to select a preset numberOn the remote control ONLY Tuning in to a Preset StationOn the remote control ONLY When playing CD-Rsor CD-RWs Playing Back DiscsPlaying Back the Entire Disc-NormalPlay 1 Press 0 OPEN on the unitOn the remote control ONLY 1 Place a disc To check the program contentsBasic Disc Operations Programming the Track Playing Order -ProgramPlayPlaying Back Discs continued Playing at Random-RandomPlayRepeating Tracks-RepeatPlay Displaying the Remaining Time during PlaybackPlaying Back Tapes Playing Back a TapeOn the unit ONLY 1 Press &/ stop/cassette holder openUsing an External Equipment Set the volume level to the minimum positionListening to the External Equipment Press AUXRecording Recording on a Tape2 Close the cassette holder gently 4 Press ‡ recordingRecording Discs -DiscSynchronized Recording Press CD 3/8 to select the CDplayer as the source Press 7 to stop the disc playbackUsing the Timers Using the Daily Timer2 Press CLOCK/TIMER repeatedly to 6 Press VOLUME +/- to adjust the volumeUsing the Timers continued Using the Sleep TimerHow the Sleep Timer actually works To deactivate the timer temporarilyMaintenance Cleaning the unitTo clean the disc General NotesTroubleshooting SymptomPossible Cause ActionSpecifications Supplied accessoriesOutput Power Amplifier Section-CA-FSG2Page Page EN 2004 Victor Company of Japan, Limited FS-G2COMPACT COMPONENT SYSTEM1204AIMMDWBET SYSTEME DE COMPOSANTS COMPACT English FrançaisLVT1345-002B FS-G2Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTSIMPORTANT POUR PRODUITS LASER For U.S.AFor Canada/pour le Canada For Canada/pour le CanadaCAUTION: Proper Ventilation Attention Aération correcteEnglish PrecautionsInstallation Power sourcesEnglish ContentsListening to FM and AM Broadcasts VOLUME TIMERLocation of the Buttons and Controls Main UnitSLEEP PRGM SOUND REC12 3 MP3 ALL RANDOM MONO ST EnglishLocation of the Buttons and Controls continued Remote ControlEnglish Getting Started Putting the Batteries into the Remote ControlUnpacking ConnectionsGetting Started continued Connecting Other EquipmentNOW you are ready to plug in the unit EnglishSetting the Clock Turning On the PowerOn the remote control ONLY On the remote control ONLY 1 Press CLOCK/TIMERBasic and Common Operations continued Adjusting the VolumeAdjusting the Tone Bass/Treble On the remote control ONLYTuning in to a Station Presetting StationsOn the remote control ONLY 1 Tune in to the station you want to preset2 Press PRESET UP or PRESET DOWN repeatedly toselect a preset number Listening to FM and AM Broadcasts continuedWhen playing CD-Rsor CD-RWs Playing Back DiscsPlaying Back the Entire Disc-NormalPlay EnglishOn the remote control ONLY On the remote control ONLY 1 Place a discTo check the program contents Playing Back Discs continuedPress REPEAT repeatedly before or during playback On the remote control ONLYOn the remote control ONLY On the remote control ONLYPress &/ stop/cassette holder open Playing Back TapesPlaying Back a Tape English1 Set the volume level to the minimum position 2 Press AUXUsing an External Equipment Listening to the External EquipmentRecording Recording on a TapeEnglish On the unit ONLYRecording Discs -DiscSynchronized Recording On the unit ONLY2 Close the cassette holder gently Press CD 3/8 to select the CDUsing the Timers Using the Daily TimerOn the remote control ONLY 2 Press CLOCK/TIMER repeatedly toUsing the Sleep Timer On the remote control ONLYHow the Sleep Timer actually works To deactivate the timer temporarilyMaintenance Cleaning the unitTo clean the disc EnglishTroubleshooting SymptomEnglish Possible CauseSpecifications Supplied accessoriesEnglish Amplifier Section-CA-FSG2MEMO EN, FR 2004 Victor Company of Japan, Limited FS-G2COMPACT COMPONENT SYSTEM1204AIMMDWBET