Input Signal Level Requirements

Enter MENU and SUB-MENUpage

1. Use CHANNEL keys to select MANUAL PROGRAM

2. Push VOLUME key to move to channel list

3. Use VOLUME keys to select

TV-CADTV-CATV-DTV

4. Use CHANNEL keys to select channel

5. Push CC key to Delete or Add

Enter MENU and SUB-MENUpage

1. Use CHANNEL keys to select PROGRAM LIST

2. Push VOLUME key to move to channel list

3. Use VOLUME , CHANNEL keys to select channel

Broadcasting frequency is automatically searched and saved. The search stats from analog TV (NTSC) to digital TV(VSB/QAM) and takes from 2 to 4 minutes. Channel numbers are allocated for weak signals from analog broadcasting. In DTV, weak signals or signals without broadcasting are ignored.

Depending on the content provided by the cable or satellite company, there may be some content received that is inappropriate for your intended viewing audience. Once channel scanning is complete, these channels can be deleted as necessary by using the IR remote control.

Common sources of television signal are cable, satellite or over-the-air antenna systems. Many of these choices will provide signal in analog, digital or both even both formats. In order to provide high-quality images, the signal level supplied to each screen should be in the range of +5dBmV to +15 dBmV when read on analog channels. A signal level outside of this range will provide less than optimum results. In order to ensure the highest degree of satisfaction, StarTrac recommends using a StarTrac Certified Installer for installation & ongoing maintenance.

October, 2012 (Version 7)

STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE