JVC UX-A70MD manual To record a single track during play or pause, Press AUX

Page 34

English

4 Press REC.

The recording starts.

The track number on the MD is flashing while recording.

TRACK

1

 

SP LP2

LP4

Flashing

MDCD

NORMAL SPEED REC

Elapsed playing

time

The now recorded track number

Recording length and speed

Ex. The track 4 of a CD is now recorded on the track 1 of an MD with MODE 2 (LP2, NORMAL SPEED REC) selected.

After the recording, both the CD player and the MD recorder stop automatically.

To stop recording, press 7.

“UTOCwriting” flashes for a while.

To record a single track during play or pause

While playing back or pausing a CD track you want to record, perform steps 3 and 4.

The playback of that CD track is stopped, and the same track starts playing from the beginning again. This time, the MD recorder starts recording the CD track.

•When the track is recorded, both the CD player and the MD recorder stop.

When recording from a CD

Two track marks may be recorded at the beginning of the recording. If this occurs, join these two track marks using the JOIN function described on page 32.

Recording the External Equipment

— Sound Synchronized Recording

With this recording method, you can start recording automatically when the source sound comes into this unit through the LINE IN jacks.

Sound synchronized Recording will stop automatically if no sound comes into for more than 30 seconds.

You have three methods (MODE 1 – 3) to record from the external equipment onto an MD.

Recording

Recording

Recording Speed

mode

length mode*

 

 

 

 

MODE 1

SP

NORMAL SPEED REC

 

 

 

MODE 2

LP2

NORMAL SPEED REC

 

 

 

MODE 3

LP4

NORMAL SPEED REC

 

 

 

*For the recording length mode, see “Stereo Long-Hour Recording (MDLP)” on page 27.

On the main unit ONLY:

1 Insert a recordable MD into the MD loading slot.

• If the MD playback starts, press 7to stop it.

2 Press AUX.

The source is changed to “AUX.”

3 Press REC MODE to select the recording mode.

•Each time you press the button, the recording modes change as follows:

MODE 1 MODE 2

AUX

 

MODE 3

(canceled)

 

 

 

4 Press REC.

“AUX Ready” appears in the main display.

5 Start playback on the external equipment.

Sound synchronized recording starts automatically when the sound comes into this unit.

To put a track mark manually while recording, press

SET on the remote control at the place you want.

To stop recording, press 7.

“UTOCwriting” flashes for a while.

– 29 –

Page 33 Page 35
Image 34
Page 33 Page 35
Contents UX-A70MD Precaución -- Interruptor English Español Português Precaución el aparato debe estar bien ventilado Class Precautions IntroductionContents Main unit Location of the ButtonsBecome familiar with the buttons on your unit Main Unit Display windowRemote Control Remote ControlGetting Started Adjusting the Voltage SelectorUnpacking To connect an outdoor AM antenna Connecting SpeakersAM antenna To attach spacersTo connect speakers Connecting Other EquipmentTo connect another component such as a cassette deck To stop and cancel the display demonstration, press Putting the Batteries into the Remote ControlTo start the display demonstration manually, press Basic and Common Operations Selecting the Sources and Starting Play Turning On the PowerAC power cord from the AC outlet To turn on the unit without playing, pressReinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Selecting the Sound ModesTo create your favorite colors Setting the Display IlluminationTo set the illumination color To dim the display illuminationListening to FM and AM Broadcasts Presetting Stations Setting the AM Tuner Interval SpacingTuning in a Station To change the FM reception modeOn the remote control only Press FM/AM Tuning in a Preset StationPress the number buttons to select a preset number Press SET againPlaying Back a CD To locate a particular point in a track during play Basic CD OperationsTo stop playback for a moment To go to another trackProgram Play To check the program contentsTo modify the program Repeating Tracks Repeat Play On the remote control onlyPlaying at Random Random Play To skip the current track, press ¢Playing Back an MD Insert an MD into the MD loading slot You can play an MDOn the main unit only Press MD OPEN/CLOSE Press MD #Basic MD Operations To change the information in the main displayTracks of the loaded MD will play at random Random play ends when all the tracks are played onceTo skip the playing track, press ¢ If the total playing time is 150 minutes or moreRecording on MDs To avoid erasing important recordings Before You Start RecordingAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeRecording FM/AM Broadcasts Recording CD CD Synchronized RecordingPress AUX Press REC Mode to select the recording modeTo record a single track during play or pause Start playback on the external equipmentEditing MDs Introducing MD Editing Functions Divide Function Join FunctionTo divide the joined tracks, see the Divide function Move Function+ 1 ? appears in the main display Select the track you want to move Press ¢orSelect the track you want to erase Press ¢or Erase FunctionALL Erase Function Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Disc title entry screen appears when you press Press ¯or ¿to change the title entry modePress SET to enter the selected title entry mode Track title entry screen appears when you pressChanging the Title Using the Timers Using Recording Timer Setting the ClockHow Recording Timer actually works To turn off the Recording Timer after its setting is done Using Daily TimerHow Daily Timer actually works To turn on the Recording Timer, press SETTo turn on the Daily Timer, press SET Press ¢or 4 repeatedly to adjust the minute Press SETVolume setting appears in the main display If the unit is kept turned on when the timer-on time comesTimer Priority Using Sleep TimerHow Sleep Timer actually works General Notes MaintenanceCleaning the unit Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD is not loaded correctly There is no MD MD MessagesTrack has been protected Troubleshooting SymptomSpecifications Important for mains AC line Importante para la línea de la red CA

UX-A70MD specifications

The JVC UX-A70MD is a compact yet powerful mini stereo system that caters to audiophiles and casual listeners alike. Designed with a sleek, modern aesthetic, this system not only complements any home decor but also packs a punch in terms of sound quality and versatility.

One of the primary features of the UX-A70MD is its integrated MD (MiniDisc) player, a rarity in contemporary audio equipment, which allows for the playback and recording of MiniDiscs. This still-cherished format offers high-quality sound reproduction, making it a favorite among those who appreciate superior audio fidelity. In addition to MD playback, the system also supports CD playback, giving users access to a wide range of music options from their personal collections.

Another standout characteristic of the UX-A70MD is its FM/AM tuner, equipped with 30 preset stations, enabling users to explore a variety of radio channels with ease. The built-in digital synthesizer ensures crystal-clear reception and sound quality. The remote control feature adds significant convenience, allowing users to manage their listening experience from a distance.

Featuring a powerful 60-watt RMS output, the system delivers robust sound with impressive clarity across all frequencies. The UX-A70MD is designed with dual speakers that enhance stereo sound separation, creating an immersive listening experience. The bass reflex system further enriches the low-end response, offering deep and punchy bass that resonates well with various musical genres.

One of the innovative technologies included in the UX-A70MD is the Dynamic Sound Generator (DSG), which enhances the overall audio quality, making the output sound more lively and engaging. The system also boasts a range of audio adjustments, including equalizer presets that allow users to tailor the sound to their preferences.

Connectivity options are abundant, with the inclusion of auxiliary inputs, enabling users to hook up external devices such as smartphones, tablets, or MP3 players. The UX-A70MD’s compact size makes it ideal for apartments, dorms, or smaller living spaces, proving that great sound does not have to come from bulky equipment.

In summary, the JVC UX-A70MD is a versatile mini stereo system that combines traditional formats like MiniDisc and CD playback with modern features such as an internal tuner and ample connectivity options. Its powerful sound output, combined with user-friendly controls and a stylish design, makes it an excellent choice for anyone looking to enhance their audio experience.
Top Page Image Contents