JVC UX-A70MD manual Divide Function, Join Function

Page 37

Continued

English

DIVIDE Function

This function allows you to divide one track into two separate tracks. It is useful, for example, when you want to add track marks at a certain point within a track or if you want to separate a recording.

•To stop any time during editing process, press

TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “DIVIDE ?” appears in the main display.

The source is changed to “MD.”

•Each time you press TITLE/EDIT, the edit mode changes as follows:

DISC TITLE? DIVIDE ? JOIN ? MOVE ?

Playback mode

 

ALL ERASE?

 

ERASE?

(canceled)

 

 

 

 

 

 

3 Press SET.

The unit starts playing back the first track (or the current track.)

4 Press ¢or 4 to select the track you want to divide.

The unit starts playing back the selected track.

•You can also press the number button(s) to directly select the track you want to divide.

•If you do not press ¢, 4, or the number button(s), the current track is played back repeatedly.

5 Press SET when you find the point where you want to divide the track.

“POSIT. 0?” appears in the main display, and the unit repeats the selected point — a 3-second period following the dividing point.

•If the dividing point is satisfactory, go to step 7.

•If not, go to the next step.

6 Press ¯or ¿to adjust the dividing point precisely.

When you stop pressing the buttons, the unit repeats the newly selected dividing point.

•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds* from the original point (Position 0).

Ex. The dividing point is shifted to “– 21.”

*When “SP” is selected for the recording length mode. For “LP2,” it is approximately ±16 seconds, and for “LP4” approximately ±32 seconds.

•When you find the right position, go to the next step.

•If you want to cancel the dividing point, press CANCEL, then select the correct dividing point.

7 Press SET.

“PUSH ENTER” appears in the main display.

8 Press ENTER to finish the editing procedure.

“EDITING” appears for a while, then “UTOCwriting” flashes while the editing you have made is being recorded on the MD.

To join the divided tracks again, see the JOIN Function.

JOIN Function

This function allows you to join two adjacent tracks into one track.

•To stop any time during editing process, press

TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “JOIN ?” appears in the main display.

The source is changed to “MD.”

•Each time you press TITLE/EDIT, the edit mode changes as follows:

DISC TITLE? DIVIDE ? JOIN ? MOVE ?

Playback mode

 

ALL ERASE?

 

ERASE?

(canceled)

 

 

 

 

 

 

– 32 –

Page 36 Page 38
Image 37
Page 36 Page 38
Contents UX-A70MD Precaución -- Interruptor English Español Português Precaución el aparato debe estar bien ventilado Class Introduction PrecautionsContents Main unit Location of the ButtonsBecome familiar with the buttons on your unit Display window Main UnitRemote Control Remote ControlGetting Started Adjusting the Voltage SelectorUnpacking AM antenna Connecting SpeakersTo connect an outdoor AM antenna To attach spacersTo connect speakers Connecting Other EquipmentTo connect another component such as a cassette deck To stop and cancel the display demonstration, press Putting the Batteries into the Remote ControlTo start the display demonstration manually, press Basic and Common Operations AC power cord from the AC outlet Turning On the PowerSelecting the Sources and Starting Play To turn on the unit without playing, pressTo turn down the volume level temporarily Adjusting the VolumeReinforcing the Bass Sound Selecting the Sound ModesTo set the illumination color Setting the Display IlluminationTo create your favorite colors To dim the display illuminationListening to FM and AM Broadcasts Tuning in a Station Setting the AM Tuner Interval SpacingPresetting Stations To change the FM reception modePress the number buttons to select a preset number Tuning in a Preset StationOn the remote control only Press FM/AM Press SET againPlaying Back a CD To stop playback for a moment Basic CD OperationsTo locate a particular point in a track during play To go to another trackProgram Play To check the program contentsTo modify the program Playing at Random Random Play On the remote control onlyRepeating Tracks Repeat Play To skip the current track, press ¢Playing Back an MD On the main unit only Press MD OPEN/CLOSE You can play an MDInsert an MD into the MD loading slot Press MD #To change the information in the main display Basic MD OperationsTo skip the playing track, press ¢ Random play ends when all the tracks are played onceTracks of the loaded MD will play at random If the total playing time is 150 minutes or moreRecording on MDs About the track marks Before You Start RecordingTo avoid erasing important recordings To put a track mark manually while recording anStereo Long-Hour Recording Mdlp Precautions for performing long-hour stereo recordingAbout High-Speed Recording To check the remaining recording timeRecording CD CD Synchronized Recording Recording FM/AM BroadcastsTo record a single track during play or pause Press REC Mode to select the recording modePress AUX Start playback on the external equipmentEditing MDs Introducing MD Editing Functions Join Function Divide Function+ 1 ? appears in the main display Move FunctionTo divide the joined tracks, see the Divide function Select the track you want to move Press ¢orALL Erase Function Erase FunctionSelect the track you want to erase Press ¢or Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Press SET to enter the selected title entry mode Press ¯or ¿to change the title entry modeDisc title entry screen appears when you press Track title entry screen appears when you pressChanging the Title Using the Timers Using Recording Timer Setting the ClockHow Recording Timer actually works How Daily Timer actually works Using Daily TimerTo turn off the Recording Timer after its setting is done To turn on the Recording Timer, press SETVolume setting appears in the main display Press ¢or 4 repeatedly to adjust the minute Press SETTo turn on the Daily Timer, press SET If the unit is kept turned on when the timer-on time comesTimer Priority Using Sleep TimerHow Sleep Timer actually works Cleaning the unit MaintenanceGeneral Notes Handling CDsAdditional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Hcms High-speed Copy Management System Scms Serial Copy Management SystemMD is not loaded correctly There is no MD MD MessagesTrack has been protected Symptom TroubleshootingSpecifications Importante para la línea de la red CA Important for mains AC line

UX-A70MD specifications

The JVC UX-A70MD is a compact yet powerful mini stereo system that caters to audiophiles and casual listeners alike. Designed with a sleek, modern aesthetic, this system not only complements any home decor but also packs a punch in terms of sound quality and versatility.

One of the primary features of the UX-A70MD is its integrated MD (MiniDisc) player, a rarity in contemporary audio equipment, which allows for the playback and recording of MiniDiscs. This still-cherished format offers high-quality sound reproduction, making it a favorite among those who appreciate superior audio fidelity. In addition to MD playback, the system also supports CD playback, giving users access to a wide range of music options from their personal collections.

Another standout characteristic of the UX-A70MD is its FM/AM tuner, equipped with 30 preset stations, enabling users to explore a variety of radio channels with ease. The built-in digital synthesizer ensures crystal-clear reception and sound quality. The remote control feature adds significant convenience, allowing users to manage their listening experience from a distance.

Featuring a powerful 60-watt RMS output, the system delivers robust sound with impressive clarity across all frequencies. The UX-A70MD is designed with dual speakers that enhance stereo sound separation, creating an immersive listening experience. The bass reflex system further enriches the low-end response, offering deep and punchy bass that resonates well with various musical genres.

One of the innovative technologies included in the UX-A70MD is the Dynamic Sound Generator (DSG), which enhances the overall audio quality, making the output sound more lively and engaging. The system also boasts a range of audio adjustments, including equalizer presets that allow users to tailor the sound to their preferences.

Connectivity options are abundant, with the inclusion of auxiliary inputs, enabling users to hook up external devices such as smartphones, tablets, or MP3 players. The UX-A70MD’s compact size makes it ideal for apartments, dorms, or smaller living spaces, proving that great sound does not have to come from bulky equipment.

In summary, the JVC UX-A70MD is a versatile mini stereo system that combines traditional formats like MiniDisc and CD playback with modern features such as an internal tuner and ample connectivity options. Its powerful sound output, combined with user-friendly controls and a stylish design, makes it an excellent choice for anyone looking to enhance their audio experience.
Top Page Image Contents