JVC UX-5000 manual Setting the Sleep Timer, Minute Snoozing

English	2. Press the ¢ or 4 button to select the music source you
	want to listen to.
	The display changes as shown below.

■5. Setting the volume level

1.Press the TIMER/SNOOZE button on the Unit. The current volume setting blinks on the display.

2.Press the ¢ or 4 button to select the volume level

--: The current volume level wil be used.

1 to 5: Low (1) to high (5) level. When the timer is turned on, the Volume will be automatically turned to the set position.

VOLUME

VOL 5

VOL 5: Approx. 11 o’clock position VOL 1

VOL 1: Approx. 8 o’clock position

■6. Press the TIMER/SNOOZE button on the

Unit.

The timer setting is completed and the display returns to the dis- play before you set the timer (The Timer indicator remains lit).

■7. Before turning off the Unit, prepare the music source selected in step 4.

Tuner: Tune to the desired station.

CD: Insert a CD.

■8. Press the button to turn off the Sys- tem.

To cancel the timer, press the TIMER/SNOOZE button. The Timer indicator goes out on the display.

To re-activate the cancelled timer, press the TIMER/ SNOOZE button to light the Timer indicator. Then, press the TIM- ER/SNOOZE button repeatedly, until the display returns to the original display before setting the timer (Be sure that the Timer in- dicator is lit.).

To confirm the timer settings, cancel the timer once by press- ing the TIMER/SNOOZE button. Then, press the TIMER/ SNOOZE button repeatedly, and you can see the current timer set- tings (ON time, OFF time, source, and volume).

To change the timer setting, repeat the setting procedure from the beginning.

•When the timer turns on, the Timer indicator starts blinking.

•When the timer turns on, it is possible to fade in the sound from volume level 0 (zero) to the preset volume.

CAUTION: If the System is unplugged, or a power failure occurs, the timer setting will be lost after about 24 hours. You will need to reset the clock first, then the timer.

5-Minute Snoozing —————————

When the timer turns on the music source you can, if you wish, ac- tivate the 5-minute snoozing function to temporarily stop playback.

Press the TIMER/SNOOZE button on the Unit.

The “SNZ” indicator lights up on the display and the power is turned off for five minutes for snoozing.

14

Setting the SLEEP Timer

Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by itself rather than play all night.

■You can only set the Sleep Timer when the System is on and a source is playing.

■1. Play a CD or tune in to the desired station.

■2. Press the SLEEP button on the Unit or the

Remote Control.

The “SLEEP” indicator lights up.

■3. Set the length of time you want the source to play before shutting off.

•Each time you press the SLEEP button, it changes the number of minutes shown on the display in this sequence:

=30 = 60 = 90 = 120 = Cancelled = (back to the begin- ning)

After setting the number of minutes for the Sleep Timer, the display will stop blinking after 5 seconds and return to the display as before setting the Sleep Timer.

The System is now set to turn off after the number of minutes you set.

To Confirm the Sleep Time

When the SLEEP button is pressed, the remaining sleep time is dis- played. Wait for 5 seconds until the display returns to the original display.

To Cancel the SLEEP Timer Setting

Press the SLEEP button until the “SLEEP” indicator goes off on the display.

Turning off the System also cancels the SLEEP Timer.

■If you are setting the Daily Timer, the System will be turned on at the set time to wake you up.